Further information for Hager TG053A - KNX weather station GPS 77x96x118mm
General
Other bus systems
None
Model
Other
Mounting method
Surface mounted (plaster)
Colour
White
RAL-number (akin)
9010
Degree of protection (IP)
IP44
Number of digital inputs
0
Bus system KNX
Bus system KNX radio
Bus system radio frequent
Bus system LON
Bus system Powernet
Radio frequent bidirectional
Bus connection included
With DCF77
Acoustic signal
With heating
Analogue input
Weather station
KNX weather station with GPS. Weather station, as a compact device for mast or wall mounting, including mast/wall bracket. The KNX weather station GPS delivers the current weather data directly to the KNX bus. Equipped with: heated sensor for measuring wind speed, measuring range 0-35 m/s, brightness sensor, measuring range 0-150 k lux, outside temperature sensor, measuring range -30 to +80°C, heated precipitation monitor, receiver for the GPS signal for time and location determination, sending of all measured values via the bus. All values can be used to control limit-dependent switching outputs. Shading control for up to 6 facades with slat and shadow edge tracking. The weekly timer switches up to 4 different time periods per weekday. With the calendar timer, 3 additional time periods can be defined in which up to 2 on/off switches take place daily. Switching outputs for all measured and calculated values. 8 logical AND and OR connections of up to 4 input objects each.
Number of communication objects: 254