General
Other bus systems	None
Model	Presence detector
Mounting method	Other
Material	Other
Material quality	Thermoplastic
Surface protection	Untreated
Surface finishing	Matt
Colour	White
RAL-number (akin)	9010
Optimum mounting height	4 m
Max. transmission range sideways	8 m
Max. transmission range frontally	7 m
Diameter detection range on floor	7 m
Detection angle vertical	55 °
Detection angle horizontal	360 °
Number of channels	2
Min. switch-on time	5 s
Max. duty cycle	480 min
Bus system KNX
Bus system KNX radio
Bus system radio frequent
Bus system LON
Bus system Powernet
Radio frequent bidirectional
Transparent
Bus connection included
Substation input
Creep-under protection
Operation mode switch
Animal zone
Staircase monitoring
Response value luminosity adjustable
Teach-function for response value luminosity
Switch-off delay self-learning

KNX presence detector, multi-channel for 2-zone constant light control. Multi-channel presence detector with integrated bus coupler and 2 independent zone detections for ceiling installation for brightness and motion-dependent switching. The lighting control of zone 2 is proportional to zone 1. A parameter enables the selection of a proportionality coefficient. The presence detector also enables the KNX dimmer or the KNX/Dali interfaces to be controlled via an object for further lighting regulation. The sensor has a semi-automatic and an automatic operating mode. Basic settings can be made directly on the already installed device without dismantling or the output can be switched on/off optionally via a remote control. The switch-off delay can be freely selected. Functions: lighting ON/OFF, forced control, dimming value, dimming value when present and absent, time functions, scene, scene when present and absent, master/slave function. Reflection rate of the natural and artificial light value can be set via parameters. The device can be programmed via KNX ETS or KNX easy.