General
Other bus systems	None
Model	Presence detector
Mounting method	Other
Material	Other
Material quality	Thermoplastic
Surface protection	Untreated
Surface finishing	Matt
Colour	White
RAL-number (akin)	9010
Optimum mounting height	4 m
Max. transmission range sideways	8 m
Max. transmission range frontally	7 m
Diameter detection range on floor	7 m
Detection angle vertical	55 °
Detection angle horizontal	360 °
Number of channels	1
Min. switch-on time	60 s
Max. duty cycle	60 min
Height	84 mm
Width	100
Bus system KNX
Bus system KNX radio
Bus system radio frequent
Bus system LON
Bus system Powernet
Radio frequent bidirectional
Transparent
Bus connection included
Substation input
Creep-under protection
Operation mode switch
Animal zone
Staircase monitoring
Response value luminosity adjustable
Teach-function for response value luminosity
Switch-off delay self-learning
With connection cable

KNX presence detector with DALI output and constant light control. KNX presence detector for ceiling installation for brightness and motion-dependent constant light control. With additional integrated DALI/DSI output for direct connection of up to 24 DALI/DSI control devices or for controlling dimmers via the KNX bus. Basic setting possible directly on the already installed device without dismantling or optionally via the EE807 remote control. Brightness range 5 - 1000 lux. Bus coupler integrated. Switch-off delay freely selectable. Detection range: approx. 7 m (at installation height 2.5 m). Functions: ON/OFF, UP/DOWN, dimming value, dimming value when present and absent, time functions, scene, scene when present and absent, master/slave function. Reflection rate of the natural and artificial light value can be set via parameters.