General
Mounting method	DIN rail (top hat rail) 35 mm
Nominal voltage AC	230 V
Nominal voltage DC	230 V
Max. continuous voltage AC	264 V
Nominal load current	26 A
Nominal discharge surge current (8/20) (L-N)	9 kA
Total discharge current (8/20) (L+N-PE)	9 kA
Total discharge current (8/20) (L1+L2+L3+N-PE)	9 kA
Voltage protection level	1.4 kV
Voltage protection level L-N	1.25 kV
Voltage protection level L-PE/N-PE	1.4 kV
Number of poles	4
Signalling at the device	Optic
Max. conductor cross section solid (solid, stranded)	4 mm²
Max. conductor cross section flexible (fine-strand)	2.5 mm²
Degree of protection (IP)	IP20
With remote signalling contact
Category type 3

Surge arrester T3 3P+N Uc 264V In 3kA Up 1.4kV contact. Device protection type 3 for 5-wire systems (L1, L2, L3, N, PE) consisting of protective plug and base element for DIN rail mounting. Optical red/green status display and remote signaling contact for error signaling. Integrated, surge-proof fuses for electrical and thermal overload. Plug with individual labeling area, can be plugged and unplugged without tools and protected against incorrect assembly by mechanical coding.