General
Mounting method	DIN rail (top hat rail) 35 mm
Nominal voltage AC	240 V
Nominal voltage DC	240 V
Max. continuous voltage AC	264 V
Max. continuous voltage DC	240 V
Nominal load current	26 A
Nominal discharge surge current (8/20) (L-N)	10 kA
Total discharge current (8/20) (L+N-PE)	10 kA
Total discharge current (8/20) (L1+L2+L3+N-PE)	10 kA
Voltage protection level	1.25 kV
Voltage protection level L-N	1.25 kV
Voltage protection level L-PE/N-PE	1.4 kV
Number of poles	2
Signalling at the device	Optic
Max. conductor cross section solid (solid, stranded)	4 mm²
Max. conductor cross section flexible (fine-strand)	2.5 mm²
Degree of protection (IP)	IP20
With remote signalling contact
Category type 3

Surge arrester T3 1P+N Uc 264V In 5kA Up 1.25kV contact. Surge protection type 2/3, consisting of protective plug and base element for single-phase power supply systems (AC/DC). Device that can be mounted on mounting rails with screw connection technology and individual labeling area on the front. QR code with link to online documentation shown on the product page. Integrated, powerful separation for safe behavior in the event of overload. Optical red/green status display and potential-free remote signaling contact for error signaling. Protective plugs are protected against incorrect assembly by mechanical coding and can be plugged and unplugged without tools.