General
Number of conductors (without earthing)	1
Lightning impulse current (10/350 µs)	100 kA
Nominal discharge surge current (8/20)	100 kA
Max. continuous voltage AC	350 V
Nominal voltage AC	240 V
Voltage protection level	1.5 kV
Voltage protection level N-PE	1.5 kV
Follow current extinguishing capability	50 kA
Mounting method	DIN rail (top hat rail) 15 mm
Construction size	2 modular spacing
Max. conductor cross section solid (solid, stranded)	35 mm²
Max. conductor cross section flexible (fine-strand)	35 mm²
Signalling at the device	Optic
Degree of protection (IP)	IP20
System configuration DC
System configuration IT
System configuration TN
System configuration TN-C
System configuration TN-C-S
System configuration TN-S
System configuration TT
System configuration other
With remote signalling contact
Exhausting
Category type 1
Integrated backup fuse
Suitable for outdoor use

Combined arrester T1+T2 1P N-PE Iimp 100kA Uc 1.5KV remote signaling contact backup fuse. Combined arrester type 1 and type 2 in accordance with DIN EN 61643-11 (VDE 0675-6-11) with integrated arrester backup fuse. Base element can be mounted variably and plug-on protection module can be replaced. For N-PE plugs and with suitable phase rail and arrester for L-PEN plugs, connection for 3+1 circuit. Combined arrester with remote signaling contact for monitoring device (potential-free changeover contact), function/defect indication by marking in the viewing window, encapsulated, non-blow-out design.