Hager SNS016, EAN: 3250615640048

Hager SNS016 Socket 16A 250V

Installation > Modular devices / equipment installation > Modular devices, switches, buttons, etc.

Hager SNS016 Socket 16A 250V

Lieske Part No. 380143
Mfg Part No SNS016
EAN-Code 3250615640048
Manufacturer Hager
Here only 37,90 EUR
45,10 EUR incl. VAT

Further information for Hager SNS016 Socket 16A 250V

General
Number of active Pins (round)0
Number of active Pins (flat)2
Number of modules (module system)2
Number of socket outlets switchable0
Imprint/indicationNone
ColourGrey
RAL-number (akin)7035
Mounting methodOther
MaterialPlastic
Surface finishingMatt
Nominal current16 A
Nominal voltage250
Frequency60 Hz
Rated fault current0 mA
Width of device44 mm
Height of device75 mm
Depth of device66 mm
Min. depth of built-in installation box40 mm
With signal lampno
With hinged lidno
Label space/information surfaceno
Transparentno
Lockableno
Eject-mechanismno
Insulated mountingyes
With orientation lightingno
Over voltage protectionno
With miniature fuseno
Halogen freeyes
Antibacterial treatmentno
With on/off switchno
With loop through functionno
Rotated central insertno
IFTTT support availableno
The Hager socket outlet SNS016 is a modular mounting device for use in distribution boards and control panels. With a rated voltage of 250 V and a rated current of 16 A, it is designed for power distribution in electrical installations. The device features QuickConnect technology, enabling fast and screwless installation, thereby increasing installation and maintenance efficiency. The socket outlet is designed for mounting on a DIN rail and is therefore ideally suited for modular control panels, where flexible and compact component arrangements are required.

Mounting device
The device is designed as a mounting device and occupies 2.5 module positions (MP). Dimensions are 75 mm in height, 44 mm in width, and 66 mm in depth. The minimum depth of the device enclosure is 40 mm, ensuring compatibility with standard recessed enclosures. The socket outlet is made of polycarbonate (PC), a robust plastic commonly used in electrical components. The surface is matte and light grey in colour, corresponding to RAL 7035. The material is halogen-free and complies with the requirements of the RoHS directive and REACh SVHC regulation, highlighting the environmental compatibility and safety of the product.

Functions and equipment in detail
The socket outlet features a flat protective earth contact, with the number of active contacts (flat) specified as two. It is a SCHUKO socket outlet, suitable for use in Germany and other European countries with corresponding socket standards. The socket outlet does not include a signal lamp, orientation lighting, a hinged cover, or a lock. There is also no labelling area or print, leaving the surface unaltered. The QuickConnect technology enables direct connection of conductors without screw connections, reducing installation time and enhancing connection reliability.

Technology explained simply
The QuickConnect technology is a connection technique where conductors are inserted directly into the terminals without the need for screws or other fastening elements. This reduces installation time and minimises the risk of errors during wiring. The socket outlet is designed for a frequency of 50 to 60 Hz, enabling use in AC installations with standard frequencies. The IP rating IP20 indicates that the device is protected against contact with fingers, but not against water or dust, restricting its use to indoor environments only.

Compatibility and accessories
The socket outlet is designed for mounting on a DIN rail and can therefore be combined with other devices of the same form factor in modular control panels. Use in distribution boards and control panels is particularly advantageous due to the modular design and quick installation.

Installation and mounting
Mounting is done on a DIN rail, where the socket outlet is inserted into the designated position and secured. The QuickConnect technology allows conductors to be inserted directly into the terminals without requiring screwdrivers. The minimum depth of the device enclosure is 40 mm, enabling installation in standard recessed enclosures. Installation is thus carried out without additional tools or aids.

Installation in distribution boards and control panels is particularly advantageous due to the modular design and quick installation. The socket outlet is intended for indoor use only, as the IP20 protection rating does not provide water or dust tightness.

Operational advantages
The quick installation via QuickConnect technology reduces installation time and minimises wiring errors. The modular design allows flexible arrangement in control panels and distribution boards. The use of polycarbonate as a material ensures high mechanical stability and heat resistance. The halogen-free design and compliance with RoHS and REACh contribute to environmental compatibility. The socket outlet is designed for use in electrical installations with a rated voltage of 250 V and a rated current of 16 A, ensuring broad applicability in electrical installations.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/380143
qrcode für Hager SNS016 Socket 16A 250V