Further information for Hager SBN380 Switch 80A 3P
General
Switching function
Off switch
Number of contacts as normally open contact
3
Number of contacts as normally closed contact
0
Number of contacts as change-over contact
0
Number of poles
3
Rated current
80 A
Rated voltage
400 V
Min. rated voltage
400 V
Rated switching capacity
1.354 kA
Short-circuit breaking capacity (Icw)
0.96 kA
Voltage type
AC
Max. lamp power
0 W
Width in number of modular spacings
3
Built-in depth
68 mm
Degree of protection (IP)
IP20
Imprint/indication
Other
With signal lamp
The Hager SBN380 switch disconnector is a three-pole switching device for use in electrical installations. It has a rated current of 80 A and is designed for an operating voltage of 400 V AC. The device functions as a switch disconnector and features three closing contacts (3S), establishing electrical connections when actuated. It is designed for installation in standard installation enclosures and complies with protection class IP20, meaning it is protected against contact with fingers and against solid foreign objects, but not against water or dust. The mounting depth is 68 mm, and the device occupies three modular units on the enclosure front.
Applications
The SBN380 is suitable for use in industrial and commercial electrical installations, particularly in systems requiring reliable and safe power switching. It is commonly used in enclosures for machine controls, lighting systems, or in building automation. The operating temperature range is between -20 °C and +70 °C, enabling use in various environments. The storage and transport temperature range extends from -40 °C to +80 °C, supporting logistics and transportation under different conditions.
Functions and Equipment in Detail
The device is designed as a switch disconnector, meaning it interrupts the circuit in its normal state. It features three closing contacts that electrically connect when the switch is operated. There are no opening or changeover contacts. The mechanical life is 40,000 switching operations, and the electrical life at rated load in categories AC21 and AC22 is 2500 switching operations each. The power loss per pole is 2.70 W, and the total power dissipation at rated current is 8.10 W. The connection terminals are designed for flexible conductors with a cross-section of 6 to 35 mm² and for rigid conductors from 6 to 50 mm². The upper and lower terminals are aligned for modular devices, enabling easy integration into existing enclosure configurations.
Technology Explained Simply
The SBN380 is designed for operation with alternating current (AC), with a frequency range of 50 to 60 Hz. The insulation strength is 440 V, and the impulse voltage withstand (Uimp) is 6000 V, ensuring high electrical safety. The device complies with DIN EN 60669-2-4 (VDE 0632-2-4) and DIN EN IEC 60947-3 (VDE 0660-107), confirming adherence to European standards for switching devices. The rated voltage is 400 V, and the device is designed for an operating voltage of 400 V AC. The rated breaking capacity is 1.354 kA, and the short-circuit withstand (Icw) is 0.96 kA. These values ensure safe disconnection under short-circuit conditions, especially when used with gL-gG fuses.
Compatibility and Accessories
The device is compatible with modular installation systems and can be installed in enclosures with standard modular units. Suitable accessories include the auxiliary switch ESC080 (6 A, 1S+1NC), which can be used for signaling or controlling additional functions. Additionally, the locking device MZN175 is available, enabling mechanical locking of the switch. The SBN390 switch disconnector (100 A, 3S, 400 V AC, 3P) is a similar device with higher current capacity and can be used as an alternative in systems with higher loads.
Mounting and Installation
Mounting is performed in standard installation enclosures with a width of three modular units. The device has a height of 83 mm, a width of 52.5 mm, and a depth of 68 mm. The nominal torque for mounting is 3.60 Nm. The connection terminals are designed for flexible and rigid conductors, with cross-section specifications detailed in the datasheet. The terminal alignment allows for easy integration into modular systems. Identification is done directly on the device, with the option for direct labeling.
Advantages in Operation
The SBN380 offers high mechanical and electrical life, enhancing maintenance-friendliness and reliability in industrial applications. Clear identification and modular design simplify installation and maintenance. Compliance with standards DIN EN 60669-2-4 and DIN EN IEC 60947-3 ensures safety and compatibility with other devices. The IP20 protection class safeguards against contact and solid foreign objects, which is sufficient for use in enclosed enclosures. Power loss is low, minimizing heat generation during operation. The device is RoHS-compliant and REACh-SVHC-free, ensuring environmental compatibility. Batteries are not included in the delivery scope.