Further information for Hager SBN363 Switch 3P 63A
General
Switching function
Off switch
Number of contacts as normally open contact
3
Number of contacts as normally closed contact
0
Number of contacts as change-over contact
0
Number of poles
3
Rated current
63 A
Rated voltage
400 V
Min. rated voltage
400 V
Rated switching capacity
1.332 kA
Short-circuit breaking capacity (Icw)
0.94 kA
Voltage type
AC
Colour calotte
Grey
Width in number of modular spacings
3
Built-in depth
68 mm
Degree of protection (IP)
IP20
Imprint/indication
Other
With signal lamp
The Hager SBN363 switch is a 3-pole switch with a rated current of 63 A and a rated voltage of 400 V AC. It is used for electrical disconnection of lines and devices in installations, particularly in industrial or commercial facilities, where safe and reliable current interruption is required. The device is designed for mounting on standard DIN rails and has a mounting depth of 68 mm, making it suitable for use in enclosures and distribution systems. The cap is grey and corresponds to the standard colour scheme for switches in this series.
Applications
The SBN363 is designed for use in electrical systems requiring high current load capacity and secure disconnection. It is particularly suitable for applications in industrial electrical engineering, building technology, and distribution enclosures, where it can function as a main or load switch. The protection rating IP20 ensures protection against contact with fingers and against solid foreign objects, but not against water or dust – therefore, it is intended for indoor use, not for outdoor environments or damp conditions.
Functions and Equipment in Detail
The switch features three closing contacts, enabling it to simultaneously disconnect power supply to three conductors when operated. No opening or changeover contacts are present. The switching function is clearly defined as a disconnect switch, meaning it interrupts the circuit in its default position. The electrical life expectancy is 5000 switching operations at rated load in categories AC21 and AC22, while the mechanical life expectancy is 60,000 switching operations. The power loss per pole is 2.30 W, with a total power dissipation of 6.90 W at rated load.
Technology Explained Simply
The SBN363 is designed for an operating voltage of 400 V AC, which corresponds to the standard voltage in three-phase networks. The insulation voltage is 440 V, ensuring sufficient electrical insulation for use in 400 V networks. The impulse voltage withstand of 6000 V protects the device against transient voltage surges. The rated breaking capacity of 1.332 kA and the short-circuit withstand (Icw) of 0.94 kA (for 1 second) demonstrate the switch’s ability to operate safely even under short-term overloads or short circuits. The connection terminals are designed for flexible conductors with a cross-section of 2.5 to 16 mm² and for rigid conductors from 2.5 to 25 mm². The upper and lower connection terminals are aligned to enable modular mounting.
Compatibility and Accessories
The switch is designed for mounting on a DIN rail and can therefore be installed in standard distribution enclosures. Suitable accessories include the locking device MZN175 and the auxiliary switch ESC080 (6 A, 1 closing contact + 1 opening contact). These components can be used to extend functionality, for example for signal transmission or mechanical protection. The combination with the auxiliary switch enables transmission of the switching state to external control systems or indicators.
Mounting and Installation
Mounting is done via a DIN rail, with a nominal torque of 2.80 Nm recommended for fastening. The device dimensions are 83 mm (height) × 52.5 mm (width) × 68 mm (depth), with the width corresponding to 3 module units. The operating temperature range is from -20 °C to +70 °C, while storage and transport temperature ranges from -40 °C to +80 °C. The device is designed for frequencies of 50 to 60 Hz, enabling use in European and international power networks.
Advantages in Operation
The SBN363 offers high reliability in current disconnection, supported by a long mechanical life and a clear switching function. The modular design enables flexible integration into existing control systems. The connection terminals are suitable for a wide range of conductor cross-sections, facilitating adaptation to different installations. Compliance with standards DIN EN 60669-1, DIN EN 60669-2-4, and DIN EN IEC 60947-3 ensures conformity with applicable safety and functional requirements. The device is REACh-SVHC free and RoHS-compliant, ensuring environmental compatibility and suitability for use in the electrical industry.