Further information for Hager SBN216 Switch 16A 1P
General
Switching function
Off switch
Number of contacts as normally open contact
2
Number of contacts as normally closed contact
0
Number of contacts as change-over contact
0
Number of poles
2
Rated current
16 A
Rated voltage
230 V
Min. rated voltage
230 V
Rated switching capacity
0.338 kA
Short-circuit breaking capacity (Icw)
0.24 kA
Voltage type
AC
Max. lamp power
0 W
Width in number of modular spacings
1
Built-in depth
68 mm
Degree of protection (IP)
IP20
With signal lamp
The Hager switch SBN216 is a modular device for use in electrical distributions, designed as a 2-pole switch with two closing contacts. The device is designed for a rated voltage of 230 V AC, with technical specifications also allowing an operating voltage up to 400 V AC. The rated current is 16 A, with current loading capacity in categories AC21 and AC22 each being 16 A. The short-circuit withstand capability (Icw) is 0.24 kA, and the rated breaking capacity is 0.338 kA. The device is intended for indoor use and complies with protection class IP20, meaning it is protected against contact with fingers and against solid foreign objects, but not against water or dust. The frequency range is between 50 and 60 Hz.
Applications
The switch SBN216 is suitable for use in electrical distributions in residential and commercial buildings, where safe and reliable current interruption is required. It is typically mounted in enclosures or distribution boxes, where it functions as part of a modular installation. The mounting width is 1 module (17.5 mm), enabling compact placement on standard DIN rails. The operating temperature ranges from -20 °C to +70 °C, ensuring reliable performance even under challenging environmental conditions.
Functions and Equipment in Detail
The switch features two closing contacts, enabling it to establish two electrical connections upon actuation. It is a pure switch without an integrated signal lamp. The connection terminals are designed as screw connections, allowing connection with rigid conductors up to 16 mm² and flexible conductors with cross-sections from 1.5 to 10 mm². Mounting is done on a DIN rail, with the device having a mounting depth of 68 mm. The connection terminals are offset, enabling better placement in complex installations. The device can be labeled, and additional components such as auxiliary switches or locking devices can be added later.
Technology Explained Simply
The electrical service life at rated load is 25,000 switching operations in categories AC21 and AC22, ensuring high reliability over a long period. The mechanical service life is 200,000 switching operations, indicating a robust construction. The power loss per pole is 0.40 W, and the total power dissipation at rated load is 0.80 W. The insulation voltage (Ui) is 440 V, and the impulse voltage withstand (Uimp) is 4000 V, emphasizing the electrical safety of the device. The device is certified according to DIN EN 60669-1, DIN EN 60669-2-4, and DIN EN IEC 60947-3 and carries the VDE mark, confirming compliance with European safety standards.
Compatibility and Accessories
The SBN216 is designed for mounting on a DIN rail and can be combined with various accessories. Suitable accessories include the locking device MZN175 for LS, FI, FI-LS 1, which provides additional safety during operation, and the auxiliary switch ESC080 with 6 A and 1 closing + 1 opening contact, which can be used for additional control functions. These components can be added later to the device to extend its functionality.
Mounting and Installation
Mounting is done on a DIN rail, with the device requiring a nominal torque of 1.80 Nm. Dimensions are 83 mm (height) × 17.5 mm (width) × 68 mm (depth). The offset arrangement of the connection terminals facilitates installation, especially in tight spaces. The device is not suitable for outdoor use, as it is not protected against weather influences.
Advantages in Operation
The SBN216 offers high mechanical and electrical service life, making it suitable for long-term applications. The modular design allows flexible expansion of functions through additional components. The screw connections are designed for a wide range of conductor cross-sections, facilitating adaptation to different installations. Certification according to relevant standards ensures safe and reliable operation.