Further information for Hager MCS316 Circuit Breaker 3P 16A
General
Release characteristic
C
Number of poles (total)
3
Number of protected poles
3
Rated current
16 A
Rated voltage
400
Rated insulation voltage Ui
500 V
Rated impulse withstand voltage Uimp
4 kV
Rated short-circuit breaking capacity Icn EN 60898 at 400 V
6 kA
Voltage type
AC
Frequency
60
Current limiting class
3
Over voltage category
3
Pollution degree
2
Width in number of modular spacings
3
Built-in depth
70 mm
Degree of protection (IP)
IP20
Ambient temperature during operating
70
Connectable conductor cross section multi-wired
25
Connectable conductor cross section solid-core
35
Power loss
6.99 W
Concurrently switching N-neutral
Additional equipment possible
Explosion-proof
Flush-mounted installation
The Hager circuit breaker MCS316 is a 3-pole switch with a rated current of 16 A and a C-trip characteristic, specifically designed for protecting circuits in industrial and commercial installations. It provides effective protection against overload and short circuit and is designed for mounting on a DIN rail. The mounting width is 3 module parts, making it suitable for standard distribution enclosures. The switch features QuickConnect terminals, enabling quick and secure connection of conductors, particularly at the output for cross-sections from 1.5 to 4.0 mm² for flexible and solid conductors. The remaining terminals are screw terminals, with the upper terminal requiring a torque of 2.80 Nm and the lower terminal also 2.80 Nm. The terminal cross-sections range from 1 to 35 mm² for solid conductors and from 1 to 25 mm² for flexible conductors.
Applications
The MCS316 is intended for use in distribution enclosures in commercial and industrial environments where high reliability and safety are required. It is suitable for protection functions in electrical installations with a rated voltage of 230/400 V AC and a frequency of 50 to 60 Hz. The operating temperature ranges from -25 °C to 70 °C, with a maximum ambient temperature during operation of 70 °C. The protection class IP20 ensures protection against contact with fingers and solid foreign objects, but not against splashing water or dust. Overvoltage category 3 and pollution degree 2 meet the requirements for indoor environments with normal pollution and moderate transient overvoltage stress.
Functions and Equipment in Detail
The switch has a rated switching capacity of 6 kA at 400 V AC according to EN 60898, making it suitable for use in installations with high short-circuit capacity. Energy limitation class 3 means that the switch effectively limits the energy of a short circuit, thereby minimizing thermal stress in the network. The rated insulation voltage is 500 V, and the rated impulse voltage withstand is 4 kV, ensuring high electrical strength. The power loss is 6.99 W at rated operation, limiting heat generation during operation. Mounting is flush, with a mounting depth of 70 mm.
Technology Explained Simply
The C-trip characteristic ensures that the switch does not unnecessarily trip during short-term current surges, such as those occurring during the startup of motors or other inductive loads, but only reacts to sustained overload or short circuit. The QuickConnect terminals allow for quick and secure connections, especially at the output, reducing installation time. The screw terminals on the input side are designed for larger conductor cross-sections and ensure a stable electrical connection. The IP20 protection class protects against contact with fingers and solid foreign objects, but is not suitable for outdoor use or in damp environments.
Compatibility and Accessories
The switch is designed for mounting on a DIN rail and can be combined with various accessories to integrate additional functions. These include, for example, phase bar models such as KDN363F or KDN380A, suitable for supplying multiple switches. Additionally, auxiliary and signal contacts such as MZ201 or MZ202 can be installed to transmit status information. The locking device MZN175 enables secure and controlled disconnection. The end caps KZN023 serve as end covers for the phase bar.
Mounting and Installation
Mounting is on a DIN rail, with a mounting depth of 70 mm to be considered. The screw terminals require a torque of 2.80 Nm to ensure a secure connection. The QuickConnect terminals are designed for conductor cross-sections from 1.5 to 4.0 mm² and enable quick connections. Flush mounting is possible, making it suitable for use in distribution enclosures.
Operational Advantages
The MCS316 offers high reliability due to its robust construction and the C-trip characteristic, which ensures precise response to overload and short circuit. The QuickConnect terminals reduce installation time and increase safety during wiring. Energy limitation class 3 minimizes thermal stress in the network, extending the service life of the installation. The power loss of 6.99 W ensures low heat generation, increasing operational safety. Compatibility with various accessories extends the functionality of the switch and allows flexible adaptation to specific requirements.