Further information for Hager MCN332 Circuit Breaker 3P 32A
General
Release characteristic
C
Number of poles (total)
3
Number of protected poles
3
Rated current
32 A
Rated voltage
400
Rated insulation voltage Ui
500 V
Rated impulse withstand voltage Uimp
4 kV
Rated short-circuit breaking capacity Icn EN 60898 at 400 V
6 kA
Rated short-circuit breaking capacity Icu IEC 60947-2 at 400 V
10 kA
Voltage type
AC
Frequency
60
Current limiting class
3
Over voltage category
3
Pollution degree
2
Width in number of modular spacings
3
Built-in depth
70 mm
Degree of protection (IP)
IP20
Ambient temperature during operating
70
Connectable conductor cross section multi-wired
25
Connectable conductor cross section solid-core
35
Power loss
13 W
Concurrently switching N-neutral
Additional equipment possible
Explosion-proof
Flush-mounted installation
The Hager circuit breaker MCN332 is a 3-pole switch with C characteristic and a rated current of 32 A, designed for use in electrical installations in residential and commercial buildings. It provides protection against overload and short circuit and is suitable for mounting in flush-mounted distribution boards. The switch occupies three module spaces and is therefore designed for standard installation enclosures. It complies with the standards DIN EN 60898-1 (VDE 0641-11) and is designed for operating voltages up to 400 V AC.
Applications
The MCN332 is intended for use in electrical distributions indoors, particularly in residential and commercial buildings. It protects electrical conductors and loads against thermal overload and short-circuit currents. The protection class IP20 ensures protection against contact with fingers and against solid foreign objects, but not against splashing water or dust. The operating temperature ranges from -25 °C to +70 °C, with the switch still able to carry the full rated current of 32 A at 70 °C. The ambient temperature during operation is a maximum of 70 °C.
Functions and Equipment in Detail
The switch features a thermal tripping function for overload protection and an electromagnetic tripping function for short-circuit disconnection. The C characteristic means a time-delayed tripping under overload, allowing short-term current surges to be tolerated. The rated switching capacity is 6 kA at 400 V AC according to IEC 60898-1. The rated insulation voltage Ui is 500 V, and the rated impulse voltage withstand Uimp is 4 kV. The energy limitation class is 3, indicating limited energy release during a short circuit. The switch is suitable for mounting in flush-mounted distributions and can be fixed to a phase rail.
Technology Explained Simply
The switch operates with a screw connection for input and output conductors. The connection cross-sections range from 1 to 35 mm² for solid conductors and from 1 to 25 mm² for stranded conductors. The nominal torque is 2.80 Nm for both upper and lower terminals. The mounting depth is 70 mm, and the width corresponds to 3 modules (52.5 mm). The power loss under nominal operation is 13 W. Pollution degree class 2 means the switch is suitable for environments with low pollution, such as indoor spaces. Overvoltage category 3 refers to applications in electrical installations not directly connected to the supply level.
Compatibility and Accessories
The switch is designed for mounting on phase rail systems and can be combined with various accessories. Suitable accessories include phase rail models such as KDN363B, KDN363A, KDN380A, KDN380B, and KDN363F, designed for 3-pole connections. Additionally, auxiliary and signal contacts such as MZ201 and MZ202 are available for control and signaling in electrical installations. Spacers such as LZ060 serve for heat dissipation, and end caps such as KZN023 protect the ends of the phase rail. A sealing cap U841 can be used for securing against unauthorized manipulation.
Mounting and Installation
The MCN332 is mounted in flush-mounted distributions and fixed to a phase rail. Mounting is done via a quick-fastening system on the phase rail, allowing the switch to be individually removed and reinstalled. The connection terminals are designed for screw connection and allow 360° rotation to ensure flexible wiring. The mounting depth of 70 mm must be considered when planning the depth of the distribution enclosure.
Advantages in Operation
The switch provides reliable disconnection in case of overload and short circuit, protecting the electrical installation and connected loads. The C characteristic allows tolerance for short-term current surges, which is particularly beneficial for motors or electronic devices. The high rated insulation voltage and impulse voltage withstand increase safety in the installation. The possibility to mount additional equipment such as signal contacts or locking devices extends the functionality of the switch in complex installations. RoHS compliance ensures environmentally compatible manufacturing.