Further information for Hager MCN325 Circuit Breaker 3P 25A
General
Release characteristic
C
Number of poles (total)
3
Number of protected poles
3
Rated current
25 A
Rated voltage
400
Rated insulation voltage Ui
500 V
Rated impulse withstand voltage Uimp
4 kV
Rated short-circuit breaking capacity Icn EN 60898 at 400 V
6 kA
Rated short-circuit breaking capacity Icu IEC 60947-2 at 400 V
10 kA
Voltage type
AC
Frequency
60
Current limiting class
3
Over voltage category
3
Pollution degree
2
Width in number of modular spacings
3
Built-in depth
70 mm
Degree of protection (IP)
IP20
Ambient temperature during operating
70
Connectable conductor cross section multi-wired
25
Connectable conductor cross section solid-core
35
Power loss
10.10 W
Concurrently switching N-neutral
Additional equipment possible
Explosion-proof
Flush-mounted installation
The Hager circuit breaker MCN325 is a 3-pole switching device with a C-trip characteristic and a rated current of 25 A. It provides overload and short-circuit protection in electrical installations and is designed for mounting in enclosures. The device requires 3 modular units in the enclosure and is rated for an operating voltage of 400 V AC. The rated insulation voltage is 500 V, and the rated impulse withstand voltage is 4 kV. The protection class IP20 ensures protection against contact with fingers and solid foreign objects, but not against water or dust. The operating temperature can reach up to 70 °C, at which the rated current decreases to 18.84 A. The power loss is 10.10 W under rated operation.
Applications
This circuit breaker is suitable for use in industrial and commercial electrical installations, particularly in enclosures where reliable protection of wiring against overload and short-circuit is required. It is designed for installations with a frequency of 50 to 60 Hz and can be used in environments with pollution degree 2, which corresponds to moderate pollution. The energy limitation class 3 indicates that the device releases limited energy during a short-circuit, enhancing safety within the enclosure.
Functions and Equipment in Detail
The device features a C-characteristic, providing moderate tripping under overload conditions and fast response during short-circuits. The rated switching capacity is 6 kA (Icn) at 400 V AC according to EN/IEC standards. The connection terminals are designed for screw connections, with a maximum conductor cross-section of 35 mm² for solid conductors and 25 mm² for stranded conductors. The terminals are designed for mounting in modular enclosures, with the upper terminal offering a 360° screw connection. The device is suitable for flush mounting.
Technology Explained Simply
The C-characteristic means that the breaker trips within a defined time when the current exceeds the rated current by 5 to 10 times, protecting the wiring from overheating and fire hazards. The rated switching capacity of 6 kA at 400 V AC indicates that the device can safely interrupt short-circuits with currents up to 6,000 amperes. The IP20 protection class protects against contact with fingers and solid foreign objects, but is not suitable for outdoor use or humid environments. The mounting depth is 70 mm, which must be considered when planning the enclosure depth.
Compatibility and Accessories
Various accessories are available for this circuit breaker to extend its functionality. These include phase bar models such as the KDN363F (3P+N, 10 mm², 63 A) or the KDN380B (3P, 16 mm², 80 A), suitable for mounting in enclosures. Additionally, auxiliary contacts (MZ201) or signal contacts (MZ202) can be connected for status indication or remote control. Spacers such as the LZ060 help with heat dissipation, and locking devices such as the MZN175 enable secure access control. End caps (KZN023) protect the ends of the phase bar from contact.
Mounting and Installation
Mounting is carried out in an enclosure with a depth of at least 70 mm. The terminals are designed for screw connections, with a nominal torque of 2.80 Nm for both upper and lower terminals. The connection cross-sections are rated for solid conductors up to 35 mm² and stranded conductors up to 25 mm². The device is mounted in 3 modular units and is compatible with modular enclosures featuring biconnect systems. The upper terminal is designed as a 360° screw connection, enabling flexible wiring.
Operational Advantages
The circuit breaker provides reliable protection of electrical wiring against overload and short-circuit. The C-characteristic ensures a balanced response to different fault conditions. The high rated switching capacity of 6 kA at 400 V AC allows use in installations with high short-circuit currents. Compatibility with various accessories extends functionality, and the modular design simplifies installation and maintenance. The power loss of 10.10 W must be considered during operation, especially when devices are densely arranged in enclosures.