Further information for Hager MBS316 Circuit Breaker 3P 16A
General
Release characteristic
B
Number of poles (total)
3
Number of protected poles
3
Rated current
16 A
Rated voltage
400
Rated insulation voltage Ui
500 V
Rated impulse withstand voltage Uimp
4 kV
Rated short-circuit breaking capacity Icn EN 60898 at 400 V
6 kA
Voltage type
AC
Frequency
60
Current limiting class
3
Over voltage category
3
Pollution degree
2
Width in number of modular spacings
3
Built-in depth
70 mm
Degree of protection (IP)
IP20
Ambient temperature during operating
70
Connectable conductor cross section multi-wired
25
Connectable conductor cross section solid-core
35
Power loss
6.33 W
Concurrently switching N-neutral
Additional equipment possible
Explosion-proof
Flush-mounted installation
The Hager circuit breaker MBS316 is a 3-pole switch with B characteristic and a rated current of 16 A, specifically designed for protection in three-phase electrical distribution networks. It provides protection against overload and short circuit and is suitable for use in residential and commercial areas. The switch is mounted in distributors with a width of three modules and features a QuickConnect terminal at the output, enabling fast and secure connection. The rated voltage is 400 V AC, with a rated insulation voltage Ui of 500 V. The rated impulse voltage withstand Uimp is 4 kV, ensuring high electrical strength under transient voltage stresses. The switch is designed for an operating temperature of up to 70 °C and complies with protection class IP20, making it suitable for indoor use.
Applications
The MBS316 is intended for use in electrical distribution systems in the field of building electrotechnics, particularly in residential and commercial areas, where reliable protection against overload and short circuit is required. It is designed for three-phase systems and can be installed in modular distributors. The mounting width of three modules allows for flexible integration into standard distribution boxes. The protection class IP20 protects against contact with solid objects and prevents entry of solid foreign bodies, but not against water or dust.
Functions and Equipment in Detail
The switch features a B characteristic, enabling selective protection during overloads, with tripping occurring at approximately 3 to 5 times the rated current. The rated switching capacity is 6 kA at 400 V AC, ensuring high switching endurance under short-circuit stress. Energy limitation class 3 ensures effective limitation of thermal energy during a short circuit. The terminals are designed for conductor cross-sections of 1 to 35 mm² for solid conductors and 1 to 25 mm² for stranded conductors. At the output, a QuickConnect terminal is integrated, suitable for cross-sections of 1.5 to 4.0 mm². Mounting is done via screw connection with a nominal torque of 2.80 Nm.
Technology Explained Simply
The B characteristic of the switch ensures that during an overload that is not critical, the switch trips only at a certain multiple of the rated current, enabling selective protection. The rated voltage of 400 V AC corresponds to the standards for three-phase networks in Europe. The rated insulation voltage of 500 V and the impulse voltage withstand of 4 kV guarantee safe insulation even under transient voltage peaks. The operating temperature of up to 70 °C allows use in environments with increased thermal load. The power loss is 6.33 W at rated operation, taking into account the thermal load on the distributor.
Compatibility and Accessories
The MBS316 is compatible with accessories such as auxiliary and signaling contacts (e.g. MZ201, MZ202) as well as locking devices (e.g. MZN175), enabling additional control or signaling. Suitable phase bar systems such as KDN363F, KDN380A or KDN363A support installation in modular distributors. The use of end caps (e.g. KZN023) and spacers (e.g. LZ060) enables proper mounting and heat dissipation. The QuickConnect terminal at the output simplifies wiring and reduces installation time.
Mounting and Installation
Mounting is done in modular distributors, with the switch occupying a width of three modules. The mounting depth is 70 mm. The terminals are designed for screw mounting, with a nominal torque of 2.80 Nm. The QuickConnect terminal at the output enables fast and secure connection for conductor cross-sections of 1.5 to 4.0 mm². The mounting is suitable for flush installations, with a clearance of 35 mm to the network to be observed. Installation is carried out in accordance with applicable standards, particularly DIN VDE 0641 and EN 60898.
Advantages in Operation
The MBS316 provides reliable protection against overload and short circuit in three-phase systems. The B characteristic enables selective protection, reducing the likelihood of unnecessary shutdowns. The QuickConnect terminal at the output reduces installation time and improves wiring safety. The high switching endurance of 6 kA at 400 V AC ensures a long service life even under high stress. Compatibility with accessories such as auxiliary and signaling contacts extends the functionality of the switch in complex distribution systems. RoHS compliance ensures environmentally friendly manufacturing.