Further information for Hager MBN120 Circuit Breaker 1P B-20A
General
Release characteristic
B
Number of poles (total)
1
Number of protected poles
1
Rated current
20 A
Rated voltage
400
Rated insulation voltage Ui
500 V
Rated impulse withstand voltage Uimp
4 kV
Rated short-circuit breaking capacity Icn EN 60898 at 230 V
6 kA
Rated short-circuit breaking capacity Icu IEC 60947-2 at 230 V
6 kA
Voltage type
AC
Frequency
60
Current limiting class
3
Over voltage category
3
Pollution degree
2
Width in number of modular spacings
1
Built-in depth
70 mm
Degree of protection (IP)
IP20
Ambient temperature during operating
70
Connectable conductor cross section multi-wired
25
Connectable conductor cross section solid-core
35
Power loss
2.79 W
Concurrently switching N-neutral
Additional equipment possible
Explosion-proof
Flush-mounted installation
The Hager circuit breaker MBN120 is a 1-pole switch with B tripping characteristic and a rated current of 20 A. It is designed for protecting electrical circuits with predominantly resistive loads such as lighting and socket outlets. With a width of 1 module and an installation depth of 70 mm, it is suitable for flush mounting in enclosures and offers a compact design for use in electrical installations. The protection rating IP20 ensures protection against contact with fingers and against solid foreign objects, making the switch suitable for indoor use.
Applications
The MBN120 is intended for use in electrical installations indoors, particularly in residential and commercial buildings. It protects circuits against overload and short circuit, with the B characteristic enabling tripping at current values of approximately 3-5 times the rated current (20 A). This makes it particularly suitable for loads with low inrush current, such as lighting, heating, and socket outlets. The operating temperature ranges from -25 °C to 70 °C, allowing use in various environments.
Functions and equipment in detail
The switch features a screw connection system with biconnect technology at the lower terminal, enabling simple and secure installation. The connection cross-sections are 1 to 35 mm² for single-core conductors and 1 to 25 mm² for multi-core conductors. The nominal torque is 2.80 Nm at both terminals. The B tripping characteristic ensures precise response to overloads, with the switch remaining stable at 20 A under rated operation. The power loss is 2.79 W under rated operation.
Technology explained simply
The switch is designed for a rated voltage of 400 V AC, with a rated insulation voltage Ui of 500 V. The rated impulse withstand voltage Uimp is 4 kV, ensuring high electrical strength even under transient voltage surges. The breaking capacity (Icn) is 6 kA at 230 V according to EN 60898, indicating high short-circuit resistance. Energy limitation class 3 ensures that the switch limits energy absorption during a short circuit, enhancing safety. Overvoltage category 3 and pollution degree 2 comply with standards for indoor installations.
Compatibility and accessories
The MBN120 is designed for mounting in enclosures with a phase rail. Suitable accessories include cable bridges such as K67C (NYAF 10 mm², 110 mm) or K67H (NYAF 6 mm², 110 mm), phase rail models such as KDN363A, KDN363F, or KDN363B, as well as auxiliary and signal contacts such as MZ201 and MZ202. Spacers such as LZ060 or locking devices such as MZN175 can be used additionally to optimize installation. Mounting is possible in 360° configuration, offering flexible installation options.
Mounting and installation
The switch is mounted flush and is designed for fastening to a phase rail. The screw terminals allow secure connections with conductors within the specified cross-section range. Mounting is performed with a torque of 2.80 Nm. The installation depth of 70 mm and width of 1 module (17.5 mm) allow compact placement in standard enclosures. The network clearance is 35 mm, which should be considered during planning of the control panel.
Advantages in operation
The MBN120 provides reliable protection through the B characteristic, optimized for typical residential and commercial applications. The robust construction and high short-circuit resistance of 6 kA ensure safety in operation. The compact 1-module design enables efficient use of enclosure space. The power loss of 2.79 W is low compared to other switches on the market, resulting in reduced heat generation. RoHS compliance ensures environmentally friendly manufacturing.