Further information for Hager LD046 Fuse Base D02 3x63A
General
Number of poles
3
Construction size
D02
Material
Plastic
Mounting method
Other
Rated voltage
400 V
Rated current
63 A
Version with cover
The Hager fuse holder LD046 is a three-pole plastic fuse holder of size D02, designed for a rated voltage of 400 V and a rated current of 63 A. It is specifically designed for mounting on DIN rails and serves as an installation component in distribution systems in industrial and commercial applications. The version with integrated cover ensures protected access to the fuse inserts and supports safety during maintenance work. The holder enables quick and secure connection of cables and is suitable for use in electrical installations with high safety requirements.
Applications
The fuse holder LD046 is intended for use in industrial and commercial facilities where reliable and safe power distribution is required. It is mounted in distribution boxes, enclosures or other electrical switching systems to accommodate fuses of size D02. Mounting on DIN rails enables modular and flexible installation, adaptable to different requirements. Size D02 is widely used in electrical installations and supports standardized integration into existing systems.
Functions and Equipment in Detail
The holder features a cage terminal as connection technology, suitable for flexible conductors with a cross-section of 1.5 to 35 mm². The nominal torque is 2.5 to 3 Nm, ensuring a secure and durable connection. The integrated cover protects the fuse inserts from mechanical stress and unauthorized access. The rated voltage of 400 V and rated current of 63 A make the holder suitable for applications in medium-voltage networks and industrial distributions. The fuse characteristic gG is intended for use in protection circuits that safeguard against short-circuit currents.
Technology Explained Simply
The fuse holder LD046 is made of halogen-free plastic, reducing fire behavior and smoke development in case of failure. The cover provides better insulation and prevents unintended contact. The cage terminal allows for easy and secure connection of cables without requiring additional tools or special mounting methods. The frequency range specification of 50 Hz indicates that the holder is designed for use in the European power grid. The power dissipation at rated current is 28.50 W, describing the thermal load capacity of the component.
Compatibility and Accessories
The holder is compatible with fuses of size D02 and characteristic gG. Suitable fuses include, for example, models LE1835 (35 A) and LE1825 (25 A). For mounting on DIN rails, phase rail models such as KB309N (3P, 10 mm², 63 A) are suitable. Screw caps such as LE18SK (D02 E18, ceramic) can be used for additional securing of connections. Busbars such as S000712S (3P, 10 mm²) are also compatible and enable efficient power distribution. The combination with these accessories supports flexible and safe installation in complex distribution systems.
Mounting and Installation
Mounting is done on a DIN rail, where the designated fastening elements of the holder are attached to the rail. The connection terminals are designed for flexible conductors, and the specified torque of 2.5 to 3 Nm must be observed to ensure a secure connection. The cover is placed after the fuse is installed to secure access to the contacts. The dimensions of the holder are 72 mm (height), 79 mm (width), and 62 mm (length), with a spacing between busbars of 35 mm. These dimensions allow standardized placement in distribution boxes.
Advantages in Operation
The fuse holder LD046 offers high reliability and safety in power distribution. The integrated cover and cage terminal ensure safe and easy operation. The use of halogen-free plastic and compliance with RoHS and REACh-SVHC contribute to environmental compatibility. The modular mounting on DIN rails enables flexible expansion and maintenance of the system. Compatibility with various fuses and accessories increases flexibility in planning and installing distribution systems.