Further information for Hager KH35E Main Conductor Terminal 35 mm² 1-pole
General
Number of poles
1
Nominal current
100 A
Connection type
Screwing
Mounting method
DIN rail
Height
55 mm
Width
27 mm
Depth
37 mm
Number of inputs
2
Number of outputs
2
Contact safe
Suitable for solid cores
Useful for stranded conductors
The Hager main circuit branch terminal KH35E is a 1-pole branch terminal for secure and reliable connection of main circuits in electrical distribution systems. It is specifically designed for use in commercial and industrial installations where structured energy distribution is required. The terminal allows branching of two conductors and is rated for cable cross-sections from 2x35 mm² to 2x25 mm², accommodating both solid and stranded conductors. The green colouring aids identification within the enclosure and supports clarity during installation and maintenance.
Main circuit branch terminal
The terminal is designed as a 1-pole unit and provides two inputs and two outputs to enable efficient power distribution. Connection is made via screws, with a nominal torque of 3.50 Nm specified to ensure a secure and durable connection. The terminal is shock-protected, meaning it meets electrical safety requirements and, when correctly installed, does not expose any hazardous contact points.
Applications
The KH35E is intended for use in distribution enclosures and meter enclosures, particularly in installations executed according to VDE-AR-N 4100:2019-04. It is suitable for connecting main circuits introduced into the lower connection area of a meter enclosure and supports structured energy distribution in industrial and commercial environments. The terminal is designed for indoor use, as it has protection rating IP20, which provides protection against contact with fingers and against solid foreign objects larger than 12.5 mm.
Technology explained simply
The terminal is rated for a nominal current of 100 A, making it suitable for medium to high loads in distribution systems. Dimensions are 55 mm height, 27 mm width, and 37 mm depth, enabling compact mounting on the DIN rail. Installation is direct onto the rail, allowing quick and secure fitting in existing enclosures. The terminal is halogen-free and complies with the requirements of the RoHS directive, ensuring environmental compatibility and avoiding harmful substances.
Compatibility and accessories
The terminal is designed for use with conductors in the cross-section range of 2x35 mm² to 2x25 mm². It is suitable for both solid and stranded conductors, enabling flexible application in various installation scenarios. The green colouring supports identification within the enclosure, especially in complex distribution systems. The terminal is suitable for use in enclosures complying with DIN VDE 0603/1 and DIN 43 870, ensuring compatibility with common standards.
Mounting and installation
Mounting is onto the DIN rail, with the specified screw torque of 3.50 Nm to be observed to ensure a secure connection. The terminal is designed for use in meter enclosures and distribution enclosures, with main circuits introduced from below or sideways into the lower connection area. The terminal is intended for indoor use, as it has protection rating IP20, which does not provide protection against water or dust, but is sufficient for use in enclosed enclosures.
Operational advantages
The KH35E provides a reliable and secure connection for main circuits, enhancing operational safety in electrical distribution systems. The shock-protected design and clear colour coding simplify installation and maintenance. Compatibility with various conductor cross-sections and DIN rail mounting enable flexible and rapid integration into existing systems. Compliance with environmental standards such as RoHS and halogen-free construction contribute to sustainability.