Hager KDN163A, EAN: 3250613740900

Hager KDN163A Phase Bar 1P Fork 10 mm²

Installation > Distributor Cabinets > Wall, Stand, distribution systems

Hager KDN163A Phase Bar 1P Fork 10 mm²

Lieske Part No. 803261
Mfg Part No KDN163A
EAN-Code 3250613740900
Manufacturer Hager
Here only 8,55 EUR
10,17 EUR incl. VAT

Further information for Hager KDN163A Phase Bar 1P Fork 10 mm²

General
Number of phases1
Number of poles1
Suitable for number of devices12
Pitch dimensions17.8 mm
Cross section10 mm²
Length210 mm
Rated permanent current Iu63 A
Type of electric connectionFork
Rated surge voltage4.5 kV
Max. rated operation voltage Ue415 V
ColourGrey
Width in number of modular spacings12
Insulatedyes
Suitable for devices with N-busbarno
Suitable for devices with auxiliary switchno
The phase bar KDN163A from Hager is a single-pole connecting element for use in distributors and meter enclosures. It is designed for electrical wiring of single-pole modular devices, such as circuit breakers, and supplies up to 12 modules over a total length of 210 mm. The bar is rated for a nominal continuous current of 63 A and features a fork connection with a cross-section of 10 mm², designed for rigid conductors. The design is insulated, ensuring safe electrical isolation between individual connection points. The bar is gray in color and corresponds to the module spacing of 17.8 mm, which matches the standard width for modular devices in distributors. The maximum rated operating voltage is 415 V, and the rated impulse voltage is 4.5 kV, making the bar suitable for use in industrial and commercial electrical installations. The bar is not intended for devices with a neutral conductor or auxiliary switches.

Applications

The phase bar KDN163A is specifically designed for use in distributors where single-pole modular devices are installed. It is suitable for applications in residential, commercial, and industrial installations where safe and structured power distribution is required. The bar enables compact and clear wiring of up to 12 modules, optimizing space requirements within the distributor. Use in meter enclosures or distributor systems is typical, especially when clear phase separation and secure power supply to individual switches or fuses are necessary.

Functions and Equipment in Detail

The bar features a fork connection, enabling a secure and mechanically stable connection to conductors with a cross-section of 10 mm². The insulation of the bar protects against accidental contact and prevents short circuits between individual connection points. The maximum number of connected modules is 12, equivalent to 12 module units. The length of the bar is 210 mm, corresponding to the required spacing for 12 modules. The bar is designed for an operating voltage of 415 V, which is sufficient for most industrial and commercial applications. The rated impulse voltage of 4.5 kV ensures adequate insulation strength against transient voltage surges.

Technology Explained Simply

The phase bar functions as a central power distribution unit within a distributor. It is responsible for distributing power from the main supply to multiple single-pole modules, such as circuit breakers. The fork connections allow for easy and secure installation of conductors, with the 10 mm² cross-section ensuring sufficient current transmission at 63 A. The insulation of the bar protects against electrical hazards and ensures clear separation of individual connections. The rated voltage of 415 V is typical for use in three-phase networks, although the bar is designed for a single phase only. The impulse voltage rating of 4.5 kV protects the bar against short-term voltage surges, which may occur due to lightning strikes or switching operations.

Compatibility and Accessories

The phase bar KDN163A is specifically designed for single-pole modular devices from Hager, particularly circuit breakers. It is not suitable for devices with a neutral conductor or auxiliary switches. As an accessory, the end cap KZN021 is available, which seals the ends of the bar and provides additional safety, especially when the bar is not fully occupied. The end cap prevents unintended contact and protects the exposed ends of the bar.

Mounting and Installation

The phase bar is mounted in a distributor or meter enclosure, where it is inserted into the designated mounting openings. The connection conductors are secured to the fork connections, ensuring a cross-section of 10 mm². The insulation of the bar ensures no electrical connections occur between individual connection points. The bar is designed for a maximum of 12 modules, with mounting in 12 module units. The end cap KZN021 can be optionally installed to cover the ends of the bar.

Operational Advantages

The phase bar KDN163A provides structured and safe power distribution in distributors. The insulation and fork connection ensure a secure and reliable connection. The maximum of 12 modules allows for a compact arrangement, minimizing space requirements within the distributor. The rating for 63 A and 415 V makes the bar suitable for a wide range of applications, particularly in commercial and industrial environments. The use of the end cap KZN021 enhances safety and prevents unintended contact.

RoHS-Compliant

The phase bar KDN163A is RoHS-compliant, meaning it meets the requirements of the EU directive restricting the use of certain hazardous substances in electrical and electronic equipment. This ensures environmentally compatible manufacturing and disposal of the product.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/803261
qrcode für Hager KDN163A Phase Bar 1P Fork 10 mm²