| General |
| Model | For 1-story support plates |
| Nominal cross section | 10 mm² |
| Number of poles | 4 |
| Panel entry | Below |
| For installation kit | 2-rows |
| Type of cable lug | Pin |
| Colour | 3xbrown / 1xblue |
The Hager phase bar KCF663L is a vertical busbar system for use in modular switchgear, particularly in enclosures and sub-distribution units. It is designed as a 2-row, left-hand configuration and enables efficient distribution and management of current flows. The bar is designed for a single-tier mounting plate and provides a secure, robust connection between switching devices. With a length of 146 mm and a nominal length of 125 mm (measured at the usable connection length), it is suitable for compact installations. The configuration includes 3 phase conductors (brown) and one neutral conductor (blue), corresponding to the standard 3+N configuration. The bar is rated for a nominal current of 63 A, making it suitable for typical distribution tasks in low- and medium-voltage installations.
Phase bar
The KCF663L serves as a vertical power distribution unit mounted in enclosures to route electrical energy from the main supply to individual switching devices or sub-stations. The 2-row design allows for dense mounting and optimizes space requirements within the enclosure. The left-hand configuration is intended for installations where the bar is positioned on the left side of the mounting plate, simplifying planning and installation in standardized enclosure configurations.
Functions and equipment in detail
The bar is designed for a connection cross-section of 10 mm² for rigid conductors, ensuring a secure and stable connection for medium to high current loads. The cable lug is designed as a pin, providing a mechanically secure and electrically reliable connection. Meter access is from below, ensuring direct accessibility during installation and maintenance of meters or measuring devices. The number of poles is 4, with the three phase conductors (brown) and the neutral conductor (blue) clearly color-coded to prevent incorrect connections.
Technology explained simply
The bar is made from a conductive material designed for electrical energy transmission at a rated current of 63 A. The 2-row construction allows for a double arrangement of contacts, enabling multiple switching devices to be connected in parallel. The vertical orientation optimizes space requirements and matches standard heights of enclosure modules. The left-hand configuration is intended for mounting on the left side of the mounting plate, which must be considered when planning enclosure layouts.
Compatibility and accessories
The phase bar is specifically designed for single-tier mounting plates and is suitable for modular switchgear. It is intended for use in enclosures and sub-distribution units where secure and structured power distribution is required. The bar is compatible with a connection cross-section of 10 mm², making it suitable for use with standard cables in electrical installations. The color coding (3x brown, 1x blue) complies with current standards for phase and neutral conductors.
Installation and mounting
Mounting is carried out in an enclosure or sub-distribution unit, with the bar fixed to the left side of a single-tier mounting plate. The vertical orientation and 2-row construction allow for dense arrangement of switching devices. Meter access from below facilitates installation and maintenance of meters. The bar is designed for rigid conductors with a cross-section of 10 mm², with connections made via pin-type cable lugs.
Operational advantages
The KCF663L provides reliable power distribution with a rated current of 63 A, sufficient for many distribution tasks in electrical installations. The 2-row design optimizes space requirements and enables dense mounting of switching devices. The clear color coding of conductors (brown for phases, blue for neutral) reduces the risk of incorrect connections. The left-hand configuration matches standardized enclosure configurations and simplifies planning and installation.
RoHS-compliant and REACh-SVHC free
The phase bar complies with the requirements of the RoHS directive and is free from substances classified as substances of very high concern (SVHC) under the REACh regulation. This ensures environmentally compatible and safe operation.