Further information for Hager KB309N Phase Bar 3P 10 mm²
General
Number of phases
3
Number of poles
3
Suitable for number of devices
13
Pitch dimensions
17.8 mm
Cross section
10 mm²
Length
1045 mm
Rated permanent current Iu
63 A
Type of electric connection
Pin
Rated surge voltage
4.5 kV
Max. rated operation voltage Ue
400 V
Colour
Grey
Width in number of modular spacings
39
Insulated
Suitable for devices with N-busbar
Suitable for devices with auxiliary switch
The Hager phase bar KB309N is a 3-pole bar with pin connection, specifically designed for use in electrical distribution systems. It serves as a connecting element for multiple fuses or switches within an enclosure and enables structured and safe power distribution. The bar is rated for a nominal continuous current of 63 A and features a connection cross-section of 10 mm², making it suitable for medium to high loads in industrial and commercial applications. The pin connection design ensures a secure and reliable electrical connection. The bar is insulated and finished in grey, allowing for clear visual differentiation within the enclosure. The width is 39 mounting units, equivalent to 1045 mm, and it is designed for installation in standard distribution enclosures.
Phase bar
The KB309N is a 3-pole phase bar designed for distributing electrical power in three-phase systems. It allows for parallel connection of up to 13 devices, with the maximum number of devices limited by the module count and electrical load capacity. The bar is rated for a maximum operating voltage of 400 V, matching the nominal voltage in industrial and commercial installations. The rated impulse withstand voltage is 4.5 kV, making the bar suitable for use in environments with transient voltage surges. The insulation of the bar protects against unintended contact and enhances operational safety.
Functions and equipment in detail
The bar features a pin connection, ensuring a mechanically stable and electrically conductive connection to the connected devices. The connection cross-section of 10 mm² is designed for rigid conductors and meets the requirements for power transmission in medium to high load ranges. The bar is rated for a nominal continuous current of 63 A, enabling safe power distribution even in heavily loaded systems. The grey colouring supports visual orientation within the enclosure and facilitates maintenance. The bar is designed for use in systems without a neutral conductor and without auxiliary switches, limiting its application to pure phase distribution systems.
Technology explained simply
The phase bar KB309N is a component for power distribution in electrical distribution systems. It consists of a long, insulated carrier with three parallel pins arranged along its length, each representing a phase (L1, L2, L3). The pins allow direct connection of fuses or switches mounted on the bar. The insulation protects against short circuits and enhances operational safety. The rating for 63 A and 400 V makes the bar suitable for typical industrial and commercial applications. The 39 mounting units correspond to a length of 1045 mm and allow installation of up to 13 devices, with the exact number depending on the design of the connected devices.
Compatibility and accessories
The KB309N is compatible with various fuses and switch-fuse units designed for 3-pole phase bars. Suitable accessories include, for example, the KZN030 end cap for 3-pole phase bar, which secures the end of the bar and protects against mechanical damage. The L73M switch-fuse unit D0 3P 63A is also compatible and can be mounted directly. The KZ021 single-pole end caps (set = 10 pcs) are suitable for other configurations but are not specifically designed for the 3-pole KB309N. Using appropriate accessories enhances safety and visual order within the enclosure.
Mounting and installation
The phase bar is mounted in a standard distribution enclosure by inserting it into the designated mounting openings. The 39 mounting units correspond to a length of 1045 mm, allowing for proper placement within the enclosure. The pins of the bar are connected to the corresponding terminals of the fuses or switches. The insulation of the bar protects against contact with live parts. Mounting requires no additional tools, with mechanical stability ensured by the bar’s shape and pin connections. The bar is designed for use in systems without a neutral conductor and without auxiliary switches, limiting its installation to pure phase distribution systems.
Advantages in operation
The KB309N provides reliable and safe power distribution in three-phase systems. The insulation enhances operational safety and protects against short circuits. The rating for 63 A and 400 V makes the bar suitable for a wide range of applications in commercial and industrial environments. The grey colouring facilitates visual orientation within the enclosure. The 39 mounting units allow installation of up to 13 devices, enabling flexible use in various system configurations. Compatibility with accessories such as end caps enhances safety and visual order within the enclosure. The bar is RoHS-compliant, ensuring environmental compatibility and adherence to environmental regulations.