General
Number of switches	1
Max. rated operation voltage Ue AC	690 V
Rated operating voltage	690 V
Rated permanent current Iu	800 A
Rated permanent current at AC-21, 400 V	800 A
Rated short-time withstand current lcw	10 kA
Rated operation power at AC-23, 400 V	360 kW
Switching power at 400 V	526 kW
Number of poles	4
Number of auxiliary contacts as normally closed contact	0
Number of auxiliary contacts as normally open contact	0
Number of auxiliary contacts as change-over contact	0
Device construction	Built-in device fixed built-in technique
Colour control element	Black
Type of control element	Toggle
Type of electrical connection of main circuit	Cable clamp
Degree of protection (IP), front side	IP40
Degree of protection (NEMA)	Other
Depth	145 mm
Height	435 mm
Width	280 mm
Version as main switch
Version as maintenance-/service switch
Version as safety switch
Version as emergency stop installation
Version as reversing switch
Motor drive optional
Motor drive integrated
Voltage release optional
Suitable for front mounting 4-hole
Suitable for front mounting centre
Suitable for distribution board installation
Suitable for intermediate mounting
Interlockable

Load break switch, size h1000, 4-pole, 800A. The load break switch in accordance with DIN EN 60947-3, size h1000, is used to switch electrical systems and networks. The load break switch separates the feed-in side from the output side in electrical systems. Mounted on a mounting plate. The three different operating states can be identified by the position of the knob (ON = top, OFF = bottom, triggered = middle position). The switches have a mechanical test button. The function of the circuit breakers can be expanded using various accessories. Including phase separators and connection lugs.