General
Number of active Pins (round)	2
Number of active Pins (flat)	0
Number of modules (module system)	2
Number of socket outlets switchable	0
Number of phases	1
Imprint/indication	None
Connection type	Other
Colour	Black
RAL-number (akin)	9011
Mounting method	Wall duct
Type of fastening	Snap mounting (engagement)
Material	Plastic
Material quality	Thermoplastic
Surface protection	Untreated
Surface finishing	Matt
Nominal current	16 A
Nominal voltage	250 V
Frequency	60 Hz
Rated fault current	0 mA
Suitable for degree of protection (IP)	IP20
Impact strength	IK07
Width of device	120 mm
Height of device	50 mm
Depth of device	54 mm
Assembly arrangement	Basic element with housing top
Mounting direction	Horizontal and vertical
Number of ports USB-A	0
Number of socket outlets	2
With signal lamp
With hinged lid
With child-protection
Label space/information surface
Transparent
Lockable
Eject-mechanism
Insulated mounting
With function lighting
With orientation lighting
Over voltage protection
Fault current protection
With miniature fuse
Halogen free
Antibacterial treatment
With on/off switch
With loop through function
Rotated central insert
Concurrently switching N-neutral
IFTTT support available

2-way socket 45° with Wago plug/clamp technology, front locking in graphite black. 2-way channel socket with increased contact protection, 45 degree socket housing, pre-wired, with quick fastening for front locking device installation, can be connected in series using a 3-pin plug connector system. Cable connection via plug-in terminals 1.5 - 2.5 mm² or via reverse polarity protected plug connector system.