General
Number of active Pins (round)	2
Number of active Pins (flat)	0
Number of modules (module system)	2
Number of socket outlets switchable	0
Number of phases	1
Imprint/indication	None
Connection type	Other
Colour	White
RAL-number (akin)	9016
Mounting method	Wall duct
Type of fastening	Snap mounting (engagement)
Material	Plastic
Material quality	Thermoplastic
Surface protection	Untreated
Surface finishing	Matt
Nominal current	16 A
Nominal voltage	250 V
Frequency	60 Hz
Rated fault current	0 mA
Suitable for degree of protection (IP)	IP20
Impact strength	IK07
Width of device	120 mm
Height of device	50 mm
Depth of device	54 mm
Min. depth of built-in installation box	54 mm
Assembly arrangement	Basic element with housing top
Number of ports USB-A	0
With signal lamp
With hinged lid
With child-protection
Label space/information surface
Transparent
Lockable
Eject-mechanism
Insulated mounting
With function lighting
With orientation lighting
Over voltage protection
Fault current protection
With miniature fuse
Halogen free
Antibacterial treatment
With on/off switch
With loop through function
Rotated central insert
Concurrently switching N-neutral
IFTTT support available

Socket + fine protection with Wago plug/clamp technology, front locking in traffic white. Channel socket 1-way and overvoltage protection, fine protection overvoltage category III, with increased contact protection, pre-wired, with quick fastening for front locking device installation, can be connected in series using a 3-pin plug connector system. Cable connection via plug terminals 1.5 - 2.5 mm² or via reverse polarity protected plug connector system.