General
Rated voltage	250 V
Rated current	25 A
Number of poles	3
Degree of protection (IP)	IP20
Connection type	Spring clamp connection
Model	Plug
Cable diameter	11.5 mm
Connection cross section (fine-strand)	4 mm²
Connection cross section (solid-core)	4 mm²
Number of connections per pole	3
Pole codification	L, N, PE
Colour coding/contact insert	Black
Locking mechanism	Integrated in plug-in connector
Max. continuous temperature resistance contact part	85 °C
Max. continuous temperature resistance strain relief	105 °C
Material housing	Polyamide (PA)
Fire load	0.126944 kWh
Contact material	CuSn
Surface finish contacts	Tinned
Pollution degree	3
Continuity resistor	1 mOhm
Rated surge voltage	4 kV
Length	76 mm
Height	15 mm
Width	34.6 mm
Mechanical coding
With strain relief
Halogen free

The Hager G4713 outlet connector is a 3-pole connector for the Energybus connector system, specifically designed for connecting rigid and fine-stranded conductors with a cross-section of 1.5 to 2.5 mm². It serves as a central component in electrical installations, particularly in distributors and flush-mounted applications, where a quick, tool-free, and secure connection is required. The design enables a reliable electrical connection that meets the requirements of modern installation systems.

Applications

The connector is intended for use in indoor installations, particularly in distributors, flush-mounted distributor boxes, and other electrical distribution systems. It is part of a modular connector system that enables flexible and quick installation of conductors. The application is in electrical systems with a rated voltage of 250 V and a rated current of 25 A, making it suitable for typical low-voltage applications in building environments.

Functions and Equipment in Detail

The G4713 features a spring clamp connection, enabling tool-free installation of conductors. The connection cross-sections are 4 mm² for fine-stranded and 4 mm² for single-stranded conductors, although actual use is limited to 1.5 to 2.5 mm². Three connections per pole are possible, allowing for flexible wiring. Pole identification is marked with L, N, and PE, ensuring clear assignment of conductors. Mechanical coding with a black contact insert ensures correct pole assignment and prevents incorrect insertion. The integrated locking mechanism in the connector secures the connection against unintentional disconnection.

Technology Explained Simply

The connector consists of a housing made of polyamide (PA), which is halogen-free and thus exhibits low smoke and toxicity values in case of fire. The contacts are made of CuSn (brass) and are tinned, ensuring high corrosion resistance and good electrical conductivity. The contact resistance is 1 mOhm, ensuring efficient current transmission. The maximum continuous temperature resistance of the contact part is 85 °C, while the strain relief is rated up to 105 °C. The strain relief protects the conductor from mechanical stress and prevents disconnection. The protection class IP20 protects against finger contact and solid foreign objects, but is not suitable for outdoor use.

Compatibility and Accessories

The connector is part of the Energybus system and is compatible with other components of this system, particularly with connector distributor boxes and outlets. The locking mechanism is integrated into the connector, allowing direct connection with compatible outlets or distributors. The mechanical coding ensures unambiguous pole assignment and prevents incorrect insertion. Use is limited to rigid and fine-stranded conductors, with cross-sections covering 1.5 to 2.5 mm².

Installation and Mounting

Mounting is tool-free, achieved by inserting the conductor into the spring clamp connection. The strain relief ensures the conductor is not disconnected by pulling forces. The locking mechanism in the connector secures the connection. Installation is carried out in distributors or flush-mounted installations, with the connector dimensions (length 76 mm, width 34.6 mm, height 15 mm) matched to standard distributor dimensions. The rated impulse voltage is 4 kV, ensuring electrical safety during operation.

Operational Advantages

The connector provides a quick and secure connection without tools, reducing installation time. The mechanical coding and integrated locking mechanism increase safety and prevent incorrect insertion. The use of halogen-free polyamide and tinned contacts ensures high durability and reliability. The strain relief protects the conductor and extends the connection's service life. The protection class IP20 is suitable for indoor use, where no direct moisture or dust exposure is present.