General
Mounting method	Flush mounted (plaster)
Type of cover	Door
Cover model	Closed
Type of door	None
Nominal current (In)	125 A
Height	703 mm
Width	353 mm
Depth	125 mm
Built-in depth	112 mm
Internal depth	119 mm
Plate thickness cabinet	1 mm
Plate thickness door/cover	2.5 mm
Colour	White
RAL-number	9010
Number of modules	48
Number of rows	4
Width in number of modular spacings	12
Number of openings for flange plates	2
Number of conduit inlets	2
Material housing	Steel
Surface protection	Powder coating
Degree of protection (IP)	IP30
Protection class	II
Impact strength	IK09
Circuit integrity	None
Transparent cover/door
With lock
Extension possible
With mounting plate
Suitable for outdoor use
Suitable for lightning protection

Field distributor UP 48PLE, empty, IP30, SKII, niche dimensions 657x315x115mm. Field distributor UP/HW certified according to DIN EN 61 439-1/-3, dimension standard according to DIN 43 870. For installation of devices up to 125 A, air and creepage distances according to DIN EN 60664-1, protection class IP30. Consisting of cabinet, cover frame and sheet steel door, powder-coated in RAL 9010 (pure white). Empty cabinet without installation kit, without QuickConnect terminal blocks, prepared for the interior installation of the univers FW support frame and contact protection covers. Cable entries at the top/bottom through removable plastic flange plates with pre-punched holes and integrated cable strain relief. Power entries can be knocked out at the side and rear. Door with internal adjustable hinges and an opening angle of 110°. Doors can be hinged on the right or left, door hinge can be changed without tools. Door lock with sash and folding handle can be sealed as standard. Two-door construction for cabinets with a width of 800 mm or more (3 panels). Right-hand doors maximum 2 panels wide. With double doors with bar lock. Frame depth or overhang 13 mm. Note: Optional interchangeable locking systems.