General
Mounting method	Surface mounted/recessed mounted
Number of rows	22
Width in number of modular spacings	48
Type of cover	Door
Cover model	With notch
Material housing	Steel
Height	1100 mm
Width	1050 mm
Depth	165 mm
Built-in depth	0 mm
Internal depth	156 mm
Colour	White
RAL-number	9010
Degree of protection (IP)	IP44
Type of closure	Other
Built-in height	1100 mm
Built-in width	1050 mm
Type of door	Double
Transparent cover/door
DIN-rail
With mounting plate
Extension possible
EMC-version
With lock
Sealable
With N-disconnect slide

Field distributor AP, univ, IP44, SKII, 240PLE, 4x7 rows, HS spacing 150mm, 1100x1050x161mm. Field distributor in accordance with DIN EN 61 439-1/-3, dimensional standard in accordance with DIN 43 870. For installation of devices up to 125 A, air and creepage distances in accordance with DIN EN 60664-1. Consisting of cabinet with door made of powder-coated and baked-on sheet steel. Two-door construction for cabinet widths of 800 mm and over (3-field). Right-hand doors maximum 2-field wide. Complete cabinet with installation kit equipped with profiled support rails, top two rows with 15 mm high top-hat rails for terminal blocks at 150 mm spacing and closed cover, bottom rows for 7.5 mm high top-hat rails at 150 mm center distance and matching contact protection covers. Cable entries at the top/bottom through removable, flexible plastic flange plates, also replaceable. Door with internal adjustable hinges and an opening angle of 110°. Doors can be hinged on the right and left, door hinge can be changed without tools. Door lock as standard with three-point bar lock and sealable folding handle. Replaceable lockable locking systems and doors, see accessories.