General
Mounting method	Surface mounted (plaster)
Type of cover	Door
Cover model	Closed
Type of door	Single
Nominal current (In)	800 A
Height	1250 mm
Width	550 mm
Depth	275 mm
Internal depth	275 mm
Plate thickness cabinet	1.5 mm
Plate thickness door/cover	1.5 mm
Colour	Grey
RAL-number	7035
Number of modules	192
Number of rows	8
Width in number of modular spacings	24
Number of openings for flange plates	4
Number of conduit inlets	4
Material housing	Steel
Surface protection	Powder coating
Degree of protection (IP)	IP55
Protection class	I
Impact strength	IK10
Circuit integrity	None
Transparent cover/door
With lock
Extension possible
With mounting plate
Suitable for outdoor use
Suitable for lightning protection

Cabinet, universal, IP55/I, 1250x550x275mm. Wall-mounted cabinet for indoor installation with VDE certificate (production monitoring) in accordance with DIN EN 61439-1/-2/-3 and dimensional standard DIN 43870, for surface mounting. For setting up a low-voltage distribution system up to 800 A, 3AC, 690 V 50 Hz. Protection class IP55, protection class I, air and creepage distances in accordance with DIN VDE 0110-1/-2. Consisting of a cabinet with a door made of powder-coated, baked-on, profiled 1.5 mm thick sheet steel. Push-through flanges at the top, ISO flange plates with metric knockouts and quick locking installed in each field at the bottom. Busbar bushings as side knockouts. Door surface-mounted, with internal hinges, door stop on the right as standard, changeable, 110 degree opening angle. Supplied as standard with swivel lever lock, DIN profile half cylinder can be installed. Door seal foamed all around, temperature and oil resistant. Cabinets can be flanged next to each other or one above the other.