General
Mounting method	Floor installation
Type of cover	Door
Cover model	Closed
Type of door	Double
Nominal current (In)	800 A
Height	2050 mm
Width	1300 mm
Depth	275 mm
Internal depth	275 mm
Plate thickness cabinet	1.5 mm
Plate thickness door/cover	1.5 mm
Colour	Grey
RAL-number	7035
Number of modules	720
Number of rows	12
Width in number of modular spacings	24
Number of openings for flange plates	10
Number of conduit inlets	10
Material housing	Steel
Surface protection	Powder coating
Degree of protection (IP)	IP55
Protection class	II
Impact strength	IK10
Circuit integrity	None
Transparent cover/door
With lock
Extension possible
With mounting plate
Suitable for outdoor use
Suitable for lightning protection

Cabinet, universal, IP55/II, 1850x1300x275mm + 200mm base. Individual distribution board for indoor installation with VDE certificate (production monitoring) according to DIN EN 61439-1/-2/-3 and dimensional standard DIN 43 870, for surface mounting. For setting up a low-voltage distribution up to 800 A, 3AC 230/400 V 50 Hz. Protection class IP55, protection class I or II, air and creepage distances according to DIN VDE 0110-1/-2. Consists of a cabinet with a door made of powder-coated, baked-on, profiled 1.5 mm thick sheet steel. Push-through flanges at the top, open at the bottom (cable inserts can be installed). Busbar bushings as side knockouts. Door on the surface, with internal hinges, door stop on the right as standard, changeable, with 110 degree opening angle. With swivel lever lock as standard, DIN profile half cylinder can be installed. Horizontal support rail for stabilization included in the cabinet. Door seal foamed all around, temperature-resistant and oil-resistant. Baseboard (height 200 mm) fitted as standard with removable front panel.
Note: Wall and floor fastening required! Door lock can be replaced with other locks. Cabinets can be flanged next to each other.