General
Mounting method	Surface mounted (plaster)
Type of cover	Door
Cover model	Closed
Type of door	Double
Nominal current (In)	250 A
Height	1400 mm
Width	1300 mm
Depth	205 mm
Built-in depth	205 mm
Internal depth	130 mm
Plate thickness cabinet	1 mm
Plate thickness door/cover	1 mm
Colour	White
RAL-number	9010
Number of modules	540
Number of rows	9
Width in number of modular spacings	60
Number of openings for flange plates	10
Number of conduit inlets	10
Material housing	Steel
Surface protection	Powder coating
Degree of protection (IP)	IP54
Protection class	II
Impact strength	IK09
Circuit integrity	None
Transparent cover/door
With lock
Extension possible
With mounting plate
Suitable for outdoor use
Suitable for lightning protection

Cabinet, universal, IP54/II, 1400x1300x205mm. Wall-mounted cabinet for indoor installation with VDE certificate (production monitoring) in accordance with DIN EN 61439-1/-3 and dimensional standard DIN 43870, for surface-mounted, flush-mounted or partially recessed installation. For setting up a low-voltage distribution system up to 400 A, 3AC 230/400 V 50 Hz. Protection class IP54, protection class II, air and creepage distances in accordance with DIN VDE 0110-1/-2. Consists of a cabinet with a door made of powder-coated, baked-on, stably profiled 1 mm thick sheet steel, inner lining made of plastic. Push-through flanges installed at the top and bottom of each field, rear knockout in the plastic part and busbar bushings as side knockouts on both sides in the lower area. Door flush with the front with internal, adjustable hinges, can be hinged on the right or left with an opening angle of 110 degrees. Door with sash lock, from a width of 800 mm and for all cabinets from a height of 1250 mm with a bar lock with three-point locking.
Note: Door lock can be replaced with other locks. Cabinets can be flanged next to each other and one above the other.