General
Mounting method	Floor installation
Type of cover	Cover
Cover model	Closed
Type of door	Double
Nominal current (In)	400 A
Height	1950 mm
Width	1300 mm
Depth	205 mm
Built-in depth	205 mm
Internal depth	205 mm
Plate thickness cabinet	1 mm
Plate thickness door/cover	1 mm
Colour	White
RAL-number	9010
Number of modules	720
Number of rows	12
Width in number of modular spacings	60
Number of openings for flange plates	10
Number of conduit inlets	10
Material housing	Steel
Surface protection	Powder coating
Degree of protection (IP)	IP44
Protection class	I
Impact strength	IK09
Circuit integrity	None
Transparent cover/door
With lock
Extension possible
With mounting plate
Suitable for outdoor use
Suitable for lightning protection

Cabinet, universal, IP44/I, 1950x1300x205mm, empty. Individual distribution board for indoor installation with VDE certificate (production monitoring) according to DIN EN 61439-1/-2/-3 and dimensional standard DIN 43870. For setting up a low-voltage distribution board up to 400 A, 3AC 230/400 V 50 Hz. Protection type IP44, protection class I, air and creepage distances according to DIN VDE 0110-1/-2. Consists of a cabinet with a door made of powder-coated, baked-on, stably profiled 1 mm thick sheet steel, inner lining made of plastic. Push-through flanges installed at the top and open at the bottom, rear knockout in the plastic part and busbar bushings as side knockouts on both sides in the lower area. Horizontal support rail included for stabilization in the cabinet. Door flush with the front with internal, adjustable hinges, can be opened either on the right or left with an opening angle of 110 degrees. Door with bar lock with three-point locking. Door lock can be replaced with other locks. Cabinets can be flanged next to each other. Skirting board (height 100 mm) fitted as standard with removable front panel.
Note: Wall and floor fastening required!