Cabinet, universal, IP44/I, 1950x800x205mm, empty. Individual distribution board for indoor installation with VDE certificate (production monitoring) according to DIN EN 61439-1/-2/-3 and dimensional standard DIN 43870. For setting up a low-voltage distribution board up to 400 A, 3AC 230/400 V 50 Hz. Protection type IP44, protection class I, air and creepage distances according to DIN VDE 0110-1/-2. Consisting of cabinet with door made of powder-coated, baked-on, stably profiled 1 mm thick sheet steel, inner lining made of plastic. Push-through flanges installed at the top and open at the bottom, rear pre-punched in the plastic part and busbar bushings as side pre-punched on both sides in the lower area. Horizontal support rail included for stabilization in the cabinet. Door flush with the front with internal, adjustable hinges, can be opened either on the right or left with an opening angle of 110 degrees. Door with bar lock with three-point locking. Door lock can be replaced with other locks. Cabinets can be flanged next to each other. Skirting board (height 100 mm) fitted as standard with removable front panel.
Note: Wall and floor fastening required!