General
Mounting method	Surface mounted (plaster)
Type of cover	Door
Cover model	Closed
Type of door	Single
Nominal current (In)	250 A
Height	598 mm
Width	398 mm
Depth	349 mm
Built-in depth	240 mm
Internal depth	240 mm
Plate thickness cabinet	70 mm
Plate thickness door/cover	22 mm
Colour	Grey
RAL-number	7035
Number of modules	36
Number of rows	3
Width in number of modular spacings	12
Number of openings for flange plates	2
Number of conduit inlets	1
Material housing	Plastic
Surface protection	Lacquered
Degree of protection (IP)	IP44
Protection class	II
Impact strength	IK10
Circuit integrity	E 30
Transparent cover/door
With lock
Extension possible
With mounting plate
Suitable for outdoor use
Suitable for lightning protection

Fire protection cabinet, universal, 598 x 398 x 349 mm, 30 minutes. Electrical fire protection wall cabinet F30 for mounting on the wall to secure escape and rescue routes (fire load insulation), prepared for setting up a low-voltage distribution system up to 630A. Suitable for maintaining the functionality of safety systems in the event of a fire for over 30 minutes. The housing is made of non-combustible building material of class A2 - s1, d0, IP44, protection class II, color similar to RAL7035 and cable entries at the top/bottom. General building approval (DIBt): Z-86.1-86. Wall cabinet consisting of empty housing, fastening straps and fastening material. One or two doors that close into the body with door stop that can be changed to the right or left, opening angle 180°. Door with swivel lever, door lock via push rod with 2-point locking and with DIN half cylinder double bit, replaceable, door hinges made of stainless steel. Rear wall with active ventilation system 230V AC cold smoke-tight, switches off automatically in the event of fire via smoke detector and self-foaming fire protection seal (all around). The housing can be provided with various surfaces (decor/varnish/veneer/metal) by the manufacturer.