General
Mounting method	Floor installation
Type of cover	Door
Cover model	Closed
Type of door	Single
Nominal current (In)	250 A
Height	2048 mm
Width	648 mm
Depth	349 mm
Built-in depth	240 mm
Internal depth	240 mm
Plate thickness cabinet	70 mm
Plate thickness door/cover	22 mm
Colour	Grey
RAL-number	7035
Number of modules	288
Number of rows	12
Width in number of modular spacings	24
Number of openings for flange plates	4
Number of conduit inlets	2
Material housing	Plastic
Surface protection	Lacquered
Degree of protection (IP)	IP44
Protection class	II
Impact strength	IK10
Circuit integrity	E 30
Transparent cover/door
With lock
Extension possible
With mounting plate
Suitable for outdoor use
Suitable for lightning protection

Fire protection cabinet, universal, 2048 x 648 x 349 mm, 30 minutes. Electrical fire protection cabinet F30 for installation on the wall or free-standing in the room (free-standing) with an additional rear wall (optional) to secure escape and rescue routes (fire load insulation), prepared for setting up a low-voltage distribution system up to 630A. Suitable for maintaining the functionality of safety systems in the event of a fire for over 30 minutes. The housing is made of non-flammable building material of class A2 - s1, d0, IP44, protection class II, color similar to RAL7035 and cable entries at the top/bottom. General building approvals (DIBt): Z-86.1-86. Free-standing cabinet consisting of empty housing, base with removable base panel that can be driven under (e.g. with a pallet truck), fastening straps and fastening material. Single or double door, hinged into the body, with door stop changeable to right or left, opening angle 180°. Door with swivel lever, door lock via push rod with 2-point locking and with DIN half cylinder double bit, replaceable, door hinges made of stainless steel. Rear wall with active ventilation system 230V AC cold smoke-tight, switches off automatically in the event of fire via smoke detector and self-foaming fire protection seal (all around).
Notes: Reinforced rear wall (not included) is essential for free-standing cabinet installation. The housing can be provided with various surfaces (decor/varnish/veneer/metal) by the manufacturer.