General
Rated operating voltage	400 V
Rated operation current	25 A
Rated excitation voltage	230 V
Voltage type (operating voltage)	AC
Voltage type (excitation voltage)	AC
Number of contacts as normally open contact	3
Number of contacts as normally closed contact	1
Max. incandescent lamp load	1900 W
Max. load fluorescent lamp	950 VA
Max. load fluorescent lamp (Duo circuit)	1990 VA
Max. load fluorescent lamp (parallel compensated)	810 VA
Built-in depth	60 mm
Degree of protection (IP)	IP2X
Width in number of modular spacings	2
Slider for hand switch
Additional equipment possible
With day/night function

Installation contactor hum-free 25A 3 NO contacts and 1 NC contact 230V. Contactor hum-free in accordance with DIN EN 61095 (VDE 0637-3) with contact position display through display window, integrated labeling field and suitable for subsequent installation of additional equipment. DC magnet system with protective circuit against overvoltage and to limit interference voltage peaks, for hum-free continuous operation and ensures low switching noise.
Note: If several devices are installed directly, a spacer (1/2 PLE) must be installed next to every second device.