Hager EPN510, EAN: 3250612369614

Hager EPN510 remote switch 1S 230 VAC

Installation > Modular devices / equipment installation > Impulse switch / relay

Hager EPN510 remote switch 1S 230 VAC

Lieske Part No. 289227
Mfg Part No EPN510
EAN-Code 3250612369614
Manufacturer Hager
Here only 44,65 EUR
53,13 EUR incl. VAT

Further information for Hager EPN510 remote switch 1S 230 VAC

General
FunctionMechanical switch
Mounting methodDIN rail
Width in number of modular spacings17.5
Built-in depth63 mm
Number of contacts as normally open contact1
Number of contacts as normally closed contact0
Number of contacts as change-over contact0
Control voltage 1230 V
Type of control voltage 1AC
Frequency control voltage 160 Hz
Control voltage 2110 V
Type of control voltage 2DC
Frequency control voltage 260 Hz
Rated switch current16 A
Supply voltage250 V
Voltage type of supply voltageAC
Max. incandescent lamp load1800 W
Max. load fluorescent lamp800 VA
Max. load fluorescent lamp (Duo circuit)1600 VA
Max. load fluorescent lamp (parallel compensated)900 VA
Max. switching current (cos phi = 0.6)16 A
Manual operationyes
The Hager EPN510 is a remote switch of the category impulse switch, designed for mounting on a DIN rail. It features a closers and is designed for a control voltage of 230 V AC as well as 110 V DC. With a rated switching capacity of 16 A and a supply voltage of 250 V AC, it is suitable for remote control of lighting circuits and other electrical loads in distribution boards. The mounting width is 17.5 module units (PLE), enabling compact placement in standard distribution boxes. The mounting depth is 63 mm. The switch is equipped with a manual operation that allows manual actuation without electrical control.

Applications
The EPN510 is primarily used in electrical installations to switch lighting circuits or other loads remotely. It is particularly suitable for applications in buildings where central or automated control of lighting is required, for example in office buildings, halls or industrial facilities. The maximum load for incandescent lamps is 1800 W, for fluorescent lamps 800 VA. For fluorescent lamps with parallel compensation, the maximum load is 900 VA, and for duo switching 1600 VA. These values take into account the different switching conditions and load types encountered in practice.

Functions and Equipment in Detail
The switch features a closers (1 NO) and no normally open or changeover contacts. The contacts are designed for a conductor cross-section of 1 to 6 mm² for flexible conductors and 1.5 to 10 mm² for rigid conductors. The control voltage can operate in both AC- and DC-mode, with AC voltage at 230 V and DC voltage at 110 V. The frequency of the control voltage is 50 to 60 Hz. The insulation voltage is 250 V, and the rated operating voltage is also 250 V AC. The no-load current consumption is 6 mA, and the power output at rated operation is 1.20 W.

Technology Explained Simply
An impulse switch like the EPN510 switches the circuit for a short moment, for example to start an incandescent bulb or a fluorescent lamp circuit. This is particularly important for fluorescent lamps, which require a high inrush current. The switch is designed to return to its resting position after the impulse. The manual operation allows the switch to be actuated without electrical control, which is useful during maintenance or in emergencies. The screw connection type ensures a secure and durable connection of the conductors.

Compatibility and Accessories
A multi-level central off switch allows hierarchical control. An auxiliary switch with 1 NO + 1 NC can be used for remote indication. Additionally, a continuous signal on/off switch is available, which can be connected to external control sensors such as push-button switches or limit switches to control the pulse duration. These accessories extend the functionality of the remote switch for more complex control systems.

Mounting and Installation
Mounting is done on a DIN rail, enabling standard installation in distribution boards. The mounting depth of 63 mm and width of 17.5 PLE must be considered when planning the distribution box. The operating temperature range is -5 °C to 40 °C, and the storage and transport temperature range is -40 °C to 80 °C. The connection cross-sections are specified for flexible and rigid conductors, with the maximum values applying to each conductor type.

Advantages in Operation
The EPN510 offers a reliable and compact solution for remote control of electrical loads. The combination of 16 A switching current, 230 V AC control voltage, and 1 PLE width makes it particularly economical and space-saving. Support for AC and DC operation expands its range of applications. The manual operation provides a redundant actuation option. RoHS compliance and REACH SVHC-free ensure environmental compatibility and use within the EU. Compliance with standards DIN VDE 0632T.1 and E VDE 0632T.502/A1/A2 ensures electrical safety and functionality. The electrical protection class according to DIN VDE 0106 Part 100 ensures safe operation.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/289227
qrcode für Hager EPN510 remote switch 1S 230 VAC