General
Function	Electronic switch
Mounting method	DIN rail
Width in number of modular spacings	17.5
Built-in depth	60 mm
Number of contacts as normally open contact	1
Number of contacts as normally closed contact	0
Number of contacts as change-over contact	0
Control voltage 1	230 V
Type of control voltage 1	AC
Frequency control voltage 1	60 Hz
Control voltage 2	24 V
Type of control voltage 2	AC/DC
Frequency control voltage 2	60 Hz
Rated switch current	16 A
Supply voltage	250 V
Voltage type of supply voltage	AC
Max. incandescent lamp load	1500 W
Max. load fluorescent lamp	1200 VA
Max. load fluorescent lamp (Duo circuit)	600 VA
Max. load fluorescent lamp (parallel compensated)	300 VA
Max. switching current (cos phi = 0.6)	16 A
Manual operation

Electronic remote switch 1S 230V and 8 to 24V AC/DC. Electronic remote switch according to DIN EN 60669-2-1 (VDE 0632-2-1) and DIN EN 60669-2-2 (VDE 0632-2-2) for pulse control of lighting circuits up to 16 A. The 230 V input and output voltages are bridged in the device. For devices with different control voltages, there is a galvanic separation between low and extra-low voltage.