General
Mounting method	DIN rail
Number of channels	1
Supply voltage	230 V
Voltage type of supply voltage	AC
Frequency supply voltage	60 Hz
Autonomy in hours	87600
Autonomy in years	10
Accuracy per day	0.25 s
Contact type	Change-over contact (NO/NC)
Number of memory locations	100
Nominal switching current at 250 V AC	10 A
Degree of protection (IP)	IP20
Width in number of modular spacings	1
Width	17.8 mm
Height	90 mm
Depth	62.5 mm
Number of contacts	1
Output signal	Other
Text guidance in display
External programming
Memory card included
60 min. program
24 h program
Weekly program
Annual program
Holiday program
Impulse program
Cycle program
Astro program
Random program
Hour meter
Mains synchronous
Quartz controlled
Radio-controlled
Radio-controlled (DCF77)
GPS (global positioning system)
Automatic switching summer-/winter time
Manual operation
External pushbutton input
Switching preselection
Potential free switch contact

Digital multifunction timer with Bluetooth, 1-channel including surface-mounted sensor. Set consisting of digital multifunction timer 1-channel and brightness surface-mounted sensor. Digital multifunction timer 1-channel with integrated Bluetooth function and app programming for time, brightness and location-dependent control.
Can be used as a day, week, year and astro clock, also with integrated twilight switch function. Exception control via wired external switch/button or KNX radio switch/button.
Programming via app by activating, deactivating and resetting Bluetooth on the device: automatic time and date, automatic summer/winter time change, public holiday and school holiday times can be selected depending on location, access blocked via app or key combination, temporary and permanent exception control on/off, lockable keyboard via key combination. Program can be created in advance in the app or adopted from templates already used. A portal can optionally be used to pass on and externally save the program.
Reduction of contact load through zero-crossing switching. Programming possible without mains voltage via integrated power reserve (approx. 5 years). Surface-mounted sensor with measuring range 5 to 2000 lx, cable length 1 m, operating temperature -5° to 45°C - cable length between connectable devices and brightness sensor max. 100 m.
Note: Communication protocol from version Bluetooth 4.2 and KNX radio RF quicklink.