Hager EER501, EAN: 3250612256228

Hager EER501 presence detector 360°

Security Technology > Sensors > Motion Detectors

Hager EER501 presence detector 360°

Lieske Part No. 2116144
Mfg Part No EER501
EAN-Code 3250612256228
Manufacturer Hager
Here only 123,59 EUR
147,07 EUR incl. VAT

Further information for Hager EER501 presence detector 360°

General
ModelPresence detector
Scan angle360 °
Optimum mounting height2.5 m
Max. transmission range sideways5 m
Max. presence range20 m²
Max. transmission range frontally2.5 m
Mounting methodFlush mounted (plaster)
Connection typePlug clamp
MaterialPlastic
Material qualityThermoplastic
Surface protectionUntreated
Surface finishingGlossy
ColourWhite
RAL-number (akin)9010
Degree of protection (IP)IP41
Impact strengthIK04
Voltage typeAC
Frequency50 Hz
Min. switch-on time2 s
Max. duty cycle60 min
Switch-off delay0 s
Switching-on delay0 s
Detection angle horizontal360 °
Pivoting range sensor, horizontal0 °
Pivoting range sensor, vertical0 °
Response value luminosity2000 lx
Max. switching power0 W
Number of switching zones1
Min. starting current0 A
Height86 mm
Depth71 mm
Diameter62 mm
Built-in width0 mm
Built-in depth73 mm
Built-in length0 mm
Built-in diameter50 mm
Min. depth of built-in installation box0 mm
Constant light controlno
HVAC-controlno
Forced switch onno
Forced switch offno
Animal zoneno
Creep-under protectionno
Networkableyes
Staircase monitoringno
Bridging switchno
Suitable for wireless transmissionno
Remote operationyes
With remote controlyes
Response value sensitivity adjustableyes
Response value luminosity adjustableyes
With signal unitno
Teach-function for response value luminosityyes
Suitable for ceiling mountingno
Dim function with dimmer basic elementno
Halogen freeyes
Antibacterial treatmentno
Suitable for C-loadno
Substation inputyes
IFTTT support availableno
With connection cableno
Presence/motion detector 360°, built-in, normally open contact, detection Ø10m. Presence/motion detector built-in for automatic switching of electrical loads, depending on heat movement/ambient brightness and is suitable for installation in cavity mounting in ceilings indoors.
Main functions: increased detection sensitivity in the central presence detection area, adjustable response brightness and daylight control, adjustable follow-up time, master/slave function.
Note: An optional IR handheld transmitter can control different operating modes (e.g. on/off).
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2116144
qrcode für Hager EER501 presence detector 360°