General
Model	Movement sensor
Scan angle	360 °
Optimum mounting height	8 m
Max. transmission range sideways	11 m
Max. transmission range frontally	7 m
Mounting method	Surface mounted (plaster)
Connection type	Plug clamp
Material	Plastic
Material quality	Thermoplastic
Surface protection	Untreated
Surface finishing	Glossy
Colour	White
RAL-number (akin)	9010
Degree of protection (IP)	IP41
Impact strength	IK04
Voltage type	AC
Frequency	60 Hz
Min. switch-on time	2 s
Max. duty cycle	60 min
Switch-off delay	0 s
Switching-on delay	0 s
Detection angle horizontal	360
Pivoting range sensor, horizontal	0 °
Pivoting range sensor, vertical	0 °
Response value luminosity	2000 lx
Max. switching power	0 W
Number of switching zones	1
Min. starting current	0 A
Height	62 mm
Depth	0 mm
Diameter	105 mm
Built-in width	0 mm
Built-in depth	0 mm
Built-in length	0 mm
Built-in diameter	0 mm
Min. depth of built-in installation box	0 mm
Constant light control
HVAC-control
Forced switch on
Forced switch off
Animal zone
Creep-under protection
Networkable
Staircase monitoring
Bridging switch
Suitable for wireless transmission
Remote operation
With remote control
Response value sensitivity adjustable
Response value luminosity adjustable
With signal unit
Teach-function for response value luminosity
Suitable for ceiling mounting
Dim function with dimmer basic element
Halogen free
Antibacterial treatment
Suitable for C-load
Substation input
IFTTT support available
With connection cable

Highbay DALI2 360° motion detector, surface-mounted, detection height 8m. Surface-mounted motion detector for automatic switching and control of DALI-2 loads and is suitable for surface-mounted installation or installation in device installation boxes indoors. Particularly suitable for detecting movement in high ceilings.
Main functions: adjustable response brightness and daylight control, adjustable follow-up time, master/slave function.
Note: An optional IR hand-held transmitter can control different operating modes (e.g. on/off).