General
Model	Movement sensor
Scan angle	220 °
Optimum mounting height	4 m
Max. transmission range sideways	10 m
Max. transmission range frontally	16 m
Mounting method	Surface mounted (plaster)
Material	Plastic
Material quality	Thermoplastic
Surface finishing	Matt
RAL-number (akin)	7016
Degree of protection (IP)	IP55
Frequency	60 Hz
Min. switch-on time	5 s
Max. duty cycle	30 min
Detection angle horizontal	220
Pivoting range sensor, horizontal	360
Max. starting current	16 A
Width	91 mm
Height	139 mm
Built-in width	0 mm
Built-in length	0 mm
Constant light control
HVAC-control
Forced switch off
Animal zone
Networkable
Suitable for wireless transmission
Remote operation
With remote control
Response value sensitivity adjustable
Response value luminosity adjustable
With signal unit
Teach-function for response value luminosity
Dim function with dimmer basic element
Halogen free
Antibacterial treatment
Substation input
IFTTT support available

Outdoor motion detector comfort 220/360° IP55 anthracite. Outdoor motion detector for lighting control in commercial buildings and residential houses by detecting moving people. Detection range of 220° with creep-by protection for local detection and a range of max. 16m at a recommended installation height of 2.5m. Horizontal lens adjustment of +/- 80° and vertical lens adjustment of +90°/-30° possible. Detection using Fresnel lenses. The monitoring area can be limited using the supplied covers. The time delay and brightness value can be set directly on the device or using the optional EE 806 remote control; a pulse can also be generated. Sensitivity can be set from 20% to 100%. Additional potential-free closing contact available. Installation on wall and ceiling possible. Can be done on corners using the optional EE856 mounting adapter.