General
Model	Movement sensor
Scan angle	220 °
Optimum mounting height	4 m
Max. transmission range sideways	10 m
Max. presence range	0 m²
Max. transmission range frontally	16 m
Mounting method	Surface mounted (plaster)
Connection type	Other
Material	Plastic
Material quality	Thermoplastic
Surface protection	Untreated
Surface finishing	Matt
Colour	Anthracite
RAL-number (akin)	7016
Degree of protection (IP)	IP55
Impact strength	IK03
Voltage type	AC
Frequency	60 Hz
Min. switch-on time	5 s
Max. duty cycle	30 min
Switch-off delay	0 s
Switching-on delay	0 s
Detection angle horizontal	220 °
Pivoting range sensor, horizontal	220
Response value luminosity	1000 lx
Max. switching power	2300 W
Number of switching zones	1
Max. starting current	16 A
Min. starting current	0 A
Width	91 mm
Height	139 mm
Depth	153 mm
Diameter	0 mm
Built-in width	0 mm
Built-in depth	0 mm
Built-in length	0 mm
Built-in diameter	0 mm
Min. depth of built-in installation box	0 mm
Constant light control
HVAC-control
Forced switch on
Forced switch off
Animal zone
Creep-under protection
Networkable
Staircase monitoring
Bridging switch
Suitable for wireless transmission
Remote operation
With remote control
Response value sensitivity adjustable
Response value luminosity adjustable
With signal unit
Teach-function for response value luminosity
Suitable for ceiling mounting
Dim function with dimmer basic element
Halogen free
Antibacterial treatment
Suitable for C-load
Substation input
IFTTT support available

Outdoor motion detector Komfort 220° IP55 anthracite. Outdoor motion detector for lighting control in commercial buildings and residential houses by detecting moving people. Detection range of 220° and a range of max. 16m with a recommended installation height of 2.5m. Horizontal lens adjustment of +/- 80° and vertical lens adjustment of +90°/-30° possible. Detection using Fresnel lenses. Limitation of the monitoring area possible using the supplied covers. The time delay and brightness value can be set directly on the device or using the optional remote control EE 806; a pulse can also be generated. Sensitivity can be set from 20% to 100%. Additional potential-free closing contact available. Installation on wall and ceiling possible. Can be done on corners using the optional mounting adapter EE856.