Further information for HAGER ECM180D - energy meter 1 phase direct 80A 2M MBUS MID
General
Type of meter
Electronic
Nominal current (In)
80 A
Max. current (Imax)
80
Nominal voltage (Un) N-L
276
Nominal voltage (Un) L-L
230 V
Frequency
65
Accuracy class
B
Pole type
Single phase
Model
Direct measurement
Energy type
Effective power and blind power
Suitable for
Purchase/supply
Tariff type
Multi-tariff
Tariff control
Internal/external
Approval
Measuring Instruments Directive
Pulse output
Optic
Pulse type
D0
Pulse rate
1000
Type of indication
Digital
Mounting method
DRA (DIN-rail adapter)
Width in number of modular spacings
2
Type of interface
M-bus
Number of positions total (counter)
9
Degree of protection (IP)
IP20
Degree of protection (NEMA)
2
Depth
60 mm
Height
92 mm
Power consumption
0.6 W
Width
36 mm
Measuring type load profile
Escapement mechanism
Calibrated
EEC40 signature
With lock code
Energy meter 1-phase, direct 80A, 2M, MBUS, MID. Energy meter for 4-quadrant measurement with the following accuracy classes: Active energy Class B according to DIN EN 50470-3, active power Class 1 according to IEC 62053-21, active power Class 1 according to IEC 61557-12 and reactive power Class 2 according to IEC 62053-23. The bidirectional meter is MID certified ex works. A sealing set is included in the scope of delivery. Suitable for measuring energy consumption and energy supply in all network systems. Up to 2 tariff counts possible via Mbus. Digital display with lighting to show active energy consumed and supplied (kWh). In addition, the real-time measured values for active power (kW), voltage (V), current (A), power factor and frequency (Hz) are displayed with a resolution of up to 9 digits including decimal places. In addition to the previously mentioned measured values, the current measured values of active power (kW), reactive power (kvar) and apparent power (kVA) as well as the power factor can be accessed via Mbus. All measured values and energy values for tariff 1 and tariff 2 can also be output via an IR interface. Wiring errors and connection errors are displayed and the measured data is saved periodically.