Further information for Hager CFA463D RCD 4-pole 63A
General
Number of poles
4
Rated voltage
400 V
Rated current
63 A
Rated fault current
0.3 A
Rated insulation voltage Ui
500 V
Rated impulse withstand voltage Uimp
4 kV
Mounting method
DIN rail
Leakage current type
A
Short-circuit breaking capacity (Icw)
6 kA
Surge current capacity
0.25 kA
Frequency
50 Hz
Degree of protection (IP)
IP20
Width in number of modular spacings
4
Built-in depth
70 mm
Ambient temperature during operating
40 °C
Pollution degree
2
Connectable conductor cross section multi-wired
16 mm²
Connectable conductor cross section solid-core
25 mm²
Power loss
19.70 W
RAL-number (akin)
7005
Voltage type
AC
Selective protection
Short-time delayed tripping
Additional equipment possible
With interlocking device
Explosion-proof
The Hager residual current circuit breaker type CFA463D is a 4-pole residual current circuit breaker (RCCB) with a rated current of 63 A and a rated residual current of 300 mA (0.3 A). It is designed for protecting electrical circuits in residential and commercial applications and provides protection against electric accidents by detecting and interrupting residual currents. The switch corresponds to Type A, which detects both alternating and pulsating direct residual currents, making it suitable for applications with electronic devices, such as LED lighting or devices with direct current power supplies. The rated voltage is 400 V, the rated insulation voltage Ui is 500 V, and the frequency is 50 Hz. The short-circuit withstand capability (Icw) is 6 kA, ensuring high mechanical and thermal stress resistance during short-circuit events. The protection class IP20 safeguards against finger contact and ingress of solid foreign objects larger than 12.5 mm, but does not protect against water or dust. The switch is designed for an operating temperature up to 40 °C and can be used in environments with pollution degree 2, indicating limited contamination by solid dust or dirt.
Applications
The residual current circuit breaker CFA463D is intended for installation in electrical distributions indoors, particularly in residential buildings, office buildings, and commercial facilities. It serves the personal protection function according to DIN VDE 0106 Part 100 and is suitable for protecting electrical installations against dangerous residual currents. The 4-pole configuration enables protection of 3-phase systems with neutral conductor, which is common in industrial and commercial electrical installations. The maximum altitude for use is 2000 m above sea level, enabling broad applicability in various geographical regions.
Functions and Equipment in Detail
The switch features a locking device that enables safe and controlled operation. The connection terminals are designed as screw terminals, with the lower terminal equipped with biconnect technology, allowing for easy and reliable connection of conductors. The connection capacity is up to 16 mm² for multi-strand conductors and up to 25 mm² for single-strand conductors. The nominal torque for the screw terminals is 2.80 Nm, ensuring a secure connection. The mounting depth is 70 mm, and the width corresponds to 4 module units, enabling mounting on a DIN rail. The power loss is 19.70 W, describing the thermal load during operation.
Technology Explained Simply
The residual current circuit breaker operates on the principle of differential current measurement. It monitors the current flow in the supply and return conductors and trips when a difference of 300 mA is detected, indicating a residual current. Type A also detects pulsating direct residual currents, which can occur with modern electronic devices. The rated voltage of 400 V and insulation strength of 500 V ensure safe operational reliability in typical low-voltage installations. The impulse voltage withstand of 4 kV protects the switch against transient voltage surges. The service life is 2000 electrical and 4000 mechanical switching operations, ensuring high operational reliability over an extended period.
Compatibility and Accessories
The switch is designed for mounting on a DIN rail and can be combined with various accessories. Suitable accessories include the spacing piece LZ060 for heat dissipation, the locking device MZN175 for LS, FI, FI-LS 1, and the contact CZ001 for residual current switches with 2(2S+2Ö) 6A 240V. These components enable extended functionality, such as mechanical protection or integration into higher-level control systems. The use of additional devices is possible, allowing adaptation to specific requirements.
Mounting and Installation
Mounting is performed on a DIN rail, taking into account the mounting depth of 70 mm and the width of 4 module units. The screw terminals require a torque of 2.80 Nm to ensure a secure and durable connection. The lower terminal with biconnect technology allows for easy and quick connection, especially with flexible conductors. Installation is carried out in electrical distributions, with the ambient temperature not exceeding 40 °C. The maximum altitude for use is 2000 m above sea level.
Advantages in Operation
The residual current circuit breaker CFA463D provides reliable personal protection through rapid detection and interruption of residual currents. The 4-pole configuration enables protection of complete 3-phase systems, and Type A detects pulsating direct residual currents, making it suitable for modern electronic devices. The high short-circuit withstand capability of 6 kA and robust construction ensure safe operational reliability. The locking device and biconnect terminals simplify installation and maintenance. Compliance with standards EN 61008-1, EN 61008-2-1, and VDE 0664 Part 10 + 11 ensures conformity with applicable safety standards.