General
Width	100 mm
Depth	68 mm
Length	2000 mm
Number of covers	1
Cover width 1	80 mm
Cover width 2	0 mm
Cover width 3	0 mm
Material	Plastic
Material quality	Polyvinyl chloride (PVC)
Surface protection	Untreated
Colour	White
RAL-number	9016
Construction rear wall (inner side)	Continuous C-profile
Number of plug-in partitions	1
Mounting method covers	Inner lying
Useful cross section	5750
Degree of protection (IP)	IP40
Impact strength	IK08
Working temperature	60
Covers supplied with the product
Symmetric
Construction type rectangular
Halogen free
With protection film
With duct connector
Mounting perforation in bottom
With cable fixing clip
Antibacterial treatment

Parapet duct lower part PVC front-locking BR 68x100mm OT 80mm in traffic white. Duct lower part for the electrical installation duct system Parapet duct made of plastic in accordance with DIN EN 50085-1 as a device installation duct with an upper part width of 80 or 120 mm for the installation of commercially available devices with or without additional panels. With bottom perforation (drill tolerance compensation on all sides) for direct wall mounting and additional rectangular perforation for tool-free fastening of the duct using clip technology on brackets. With an upper part width of 80 mm with front-locking, tool-free device installation for fastening devices and device installation boxes with quick fastening - additional C-profile as a device installation option as with all ducts with an upper part width of 120 mm. Couplings for simple and precise duct installation, partition walls and cable retention clips available as accessories.
Note: Sound and fire protection measures must be carried out professionally.