General
Height	44 mm
Width	45 mm
Length	2000 mm
Useful cross section	1145
Material	Plastic
Material quality	Polyvinyl chloride (PVC)
Surface protection	Untreated
Colour	Grey
RAL-number	7030
Number of permanent partitions	0
Number of plug-in partitions	0
Type of fastening	Bottom perforation
Cover model	Loose
Working temperature	60
Halogen free
Suitable for circuit integrity
Transparent
With cable fixing clip
With protection film
With duct connector
Delivery on roll
Pre-stamping
Antibacterial treatment

The cable management channel B40040 0 7030B from Hager is an installation channel made of polyvinyl chloride (PVC) for the installation of electrical cables in indoor environments. It has dimensions of 44 mm height, 45 mm width, and a length of 2000 mm. The colour is stone grey, corresponding to RAL number 7030, and the surface is untreated. The channel is not transparent and is delivered without protective film. It is designed for an operating temperature range of -5 °C to 60 °C and is not suitable for fire-resistance performance according to DIN 4102-12.

Applications

The channel is intended for cable installation in dry indoor areas. It is commonly used in electrical installations to route cables in an organised and safe manner. Due to its composition of PVC BA6, it is suitable for use in areas where no special requirements apply to fire behaviour or halogen-free properties. The dimensions of 40x40 mm (inner cross-section) allow for up to six cables with a diameter of 11 mm at 50% fill, provided no devices are mounted inside the channel.

Functions and equipment in detail

The channel features a loose lid cover, enabling easy installation and maintenance. Mounting is achieved via bottom perforation, allowing the channel to be fixed to base surfaces. The channel does not include fixed or plug-in partition panels and is not treated with antibacterial properties. There are no pre-moulded features, and the channel is not supplied on a roll.

Technology explained simply

The channel is made of PVC, a robust plastic known for its mechanical stability and chemical resistance. The designation BA6 refers to the fire behaviour class according to DIN 4102, applicable to components in non-combustible building parts. The maximum operating temperature of 60 °C is sufficient for use in standard indoor environments. The inner cross-section of 1145 mm² provides sufficient space for multiple cables, with capacity depending on cable size and fill level. The loose lid cover allows for flexible installation and later access for maintenance work.

Compatibility and accessories

The channel does not include a channel connector or coupling, so additional connection pieces are required to join multiple channel sections.

Installation and mounting

Mounting is done via bottom perforation, allowing the channel to be fixed to base surfaces such as walls or ceilings. The loose lid cover facilitates installation, as it is attached after the channel is secured. The length of 2000 mm enables efficient cable routing with minimal connections. The untreated surface allows for direct mounting without additional preparation.

Advantages in operation

The channel provides structured and safe cable routing, simplifying maintenance and inspection. The use of PVC BA6 ensures sufficient mechanical strength and chemical resistance. The stone grey colour (RAL 7030) blends well into many indoor environments. The loose lid cover allows for flexible use, and the dimensions are suitable for typical installation tasks. Compliance with RoHS and REACh-SVHC free standards indicates that the channel is manufactured in an environmentally compatible manner.