General
Width	125 mm
Height	18 mm
Number of channels	2
Length	2000 mm
Material	Aluminium
Colour	Aluminium
RAL-number	9006
Max. load capacity	15 t
Working temperature	60 °C
Bending strength	Rigid
Degree of protection (IP)	IP30
Impact strength	IK08
Material quality	Other
Halogen free
Self-adhesive
Sealing lip
With anti-slip layer
Antibacterial treatment
Demountable
Mounting perforation in bottom
Suitable for car
Suitable for truck
With attachment
With cover

The Hager floor-mounted cable duct AKA181250ELN is a foot-traffic-resistant cable duct made of anodized aluminium with dimensions of 18 mm height, 125 mm width, and a length of 2000 mm. It features two separate chambers, enabling the separate routing of power and data cables. The construction with a full-height partition panel increases the mechanical stability and load capacity of the duct. The removable top cover simplifies cable insertion and installation. The duct is designed for indoor use and offers a protection rating of IP30 and impact resistance according to IK08, making it suitable for moderate mechanical loads. The material quality meets the requirements for aluminium products in electrical and IT applications, with the material being halogen-free and REACh-SVHC-free. The surface is naturally anodized, providing a uniform, weather-resistant, and corrosion-inhibiting coating, corresponding to RAL number 9006. The duct is disassemblable, allowing adaptation to individual installation situations.

Foot-traffic-resistant floor-mounted duct made of anodized aluminium offers high mechanical stability and is suitable for use in areas with increased foot traffic. The maximum load capacity is 15 t, enabling use in industrial or commercial environments. The operating temperature is limited to 60 °C, making the duct suitable for normal indoor conditions. The rigid bending behaviour ensures stable installation without deformation. The construction with two chambers supports the proper separation of power and data cables, enhancing the safety and functionality of the installation. The maximum capacity is eight cables with a diameter of 11 mm at 50 % fill, without placing devices inside the duct.

Functions and equipment in detail include the separate routing of cables through two chambers, which are isolated from each other by a full-height partition panel. The removable top cover allows for easy and quick cable insertion. Installation is done via screw fastening, and the product does not feature integrated mounting holes in the base. Accessories for mounting and transitions are included in the delivery scope, simplifying installation. However, no sealing lip, anti-slip coating, or cover cap is provided. The surface is not self-adhesive, requiring additional fastening methods.

Technology explained simply shows that the duct is made of aluminium, which receives a protective, corrosion-resistant layer through anodizing. The IP30 protection rating prevents entry of solid foreign objects larger than 2.5 mm and splashing water, but not direct water jets. The IK08 impact resistance corresponds to resistance against mechanical loads typical for indoor environments. The material quality is suitable for use in electrical and IT installations, with the halogen-free composition enhancing environmental compatibility. The disassemblability allows individual adaptation to different installation situations.

Compatibility and accessories include suitable earthing conductors such as L4182GNGE (length 300 mm) and L4181GNGE (length 150 mm), equipped with crimp sleeves. These components enable safe and standard-compliant earthing of the installation. Installation is done via screws, with double-sided adhesive tape included in the accessories to support fastening.

Installation and mounting is performed by screw fastening to the base surface. The removable top cover facilitates cable routing. The disassemblability of the duct allows adaptation to different room geometries. The use of accessories such as earthing conductors and transition components is required to ensure a complete and safe installation.

Operational advantages include high mechanical stability, easy handling due to the removable top cover, and the separate routing of power and data cables. The anodized surface ensures long service life and resistance to corrosion. The halogen-free composition and REACh-SVHC-free status enhance environmental compatibility. The disassemblability and compatibility with accessory components increase installation flexibility.

Accessories for mounting and transitions are included in the delivery scope, with double-sided adhesive tape provided to support installation. Earthing conductors L4182GNGE and L4181GNGE are available as compatible components to complete the installation safely and in compliance with standards.