General
Number of poles (total)	4
Number of protected poles	4
Rated voltage	400 V
Rated insulation voltage Ui	500 V
Rated impulse withstand voltage Uimp	4 kV
Rated current	13 A
Rated fault current	0.03 A
Leakage current type	A
Current limiting class	3
Rated short-circuit breaking capacity Icn acc. EN 61009-1	6 kA
Disconnection characteristic	Undelayed
Surge current capacity	3 kA
Voltage type	AC
Frequency	50 Hz
Release characteristic	B
Over voltage category	3
Pollution degree	2
Ambient temperature during operating	40 °C
Width in number of modular spacings	4
Built-in depth	70 mm
Degree of protection (IP)	IP20
Connectable conductor cross section solid-core	25 mm²
Connectable conductor cross section multi-wired	16 mm²
Power loss	10.1 W
Concurrently switching N-neutral
With interlocking device
Anti-nuisance tripping version

Residual current circuit breaker 4P 6kA B-13A 30mA Type A QC/QB. Residual current circuit breaker in accordance with DIN EN 61009-1 (VDE 0664-20) with overload protection of the neutral conductor through a 4-pole circuit breaker for 400 V three-phase circuits and a residual current protection circuit in a compact housing. QuickConnect spring terminal in accordance with DIN EN 60898-1 (VDE 0641-11), on the outgoing and incoming circuits, blue test button and residual current display. Easy individual removal from the phase busbar assembly using top and bottom top hat rail sliders. Suitable for subsequent installation of additional equipment. Labeling option directly on the device.