General
Number of poles (total)	2
Number of protected poles	1
Rated voltage	240 V
Rated insulation voltage Ui	500 V
Rated impulse withstand voltage Uimp	4 kV
Rated current	6 A
Rated fault current	0.03 A
Leakage current type	A
Current limiting class	3
Rated short-circuit breaking capacity IEC 60947-2	10 kA
Rated short-circuit breaking capacity Icn acc. EN 61009-1	10 kA
Disconnection characteristic	Undelayed
Surge current capacity	0.25 kA
Voltage type	AC
Frequency	50 Hz
Release characteristic	C
Over voltage category	3
Pollution degree	2
Ambient temperature during operating	40 °C
Width in number of modular spacings	2
Built-in depth	68 mm
Degree of protection (IP)	IP20
Connectable conductor cross section solid-core	25 mm²
Connectable conductor cross section multi-wired	16 mm²
Power loss	1.90 W
Concurrently switching N-neutral
With interlocking device
Anti-nuisance tripping version

Residual current circuit breaker 1P+N 10kA C-6A 30mA Type A. Residual current circuit breaker in accordance with DIN EN61009-1 (VDE 0664-20) and DIN EN 61009-2-1 (VDE 0664-21) with bi-connect terminals at the bottom, blue test button and residual current display. Easy to remove from the phase busbar system. Suitable for the subsequent installation of additional equipment. Labeling option directly on the device.