Gustav Hensel 62000001, EAN: 4012591124931

Gustav Hensel DK 0202 G Junction Box 5-pole waterproof

Installation > Install Outlets and Accessories > Surface mounted junction boxes, waterproof

Gustav Hensel DK 0202 G Junction Box 5-pole waterproof

Lieske Part No. 147783
Mfg Part No 62000001
EAN-Code 4012591124931
Manufacturer Gustav Hensel
Here only 8,12 EUR
9,66 EUR incl. VAT

Further information for Gustav Hensel DK 0202 G Junction Box 5-pole waterproof

General
Degree of protectionIP66
Impact strengthIK07
Rated insulation voltage690 V
Rated current20 A
Connection cross section0,75–4 mm²
Number of terminals per pole2
Connection typeScrew connection
Clamp tightening torque0,5 Nm
Strip length10 mm
Conductor typesolid, stranded, fine-stranded
Conductor shapeRound
Cable entryelastic sealing membranes
Number of cable entries8
Sealing area wall6–15 mm
Sealing area floor6–13 mm
Pre-printingM20
Cover attachmentQuick-lock
MaterialPolypropylene
Temperature resistance material-25 to +80 °C
Ambient temperature-25 to +40 °C
Relative humidity≤ 50 % at 40 °C, ≤ 100 % at 25 °C
ApprovalDIN EN 60670-1/-22, IEC 60670-1/-22
CertificateVDE 40049684
Colourgrey, RAL 7035
Halogen freeYes
Silicone-freeYes
The cable distribution box DK 0202 G from Gustav Hensel is a surface-mounted distribution box made of high-quality thermoplastic, specifically designed for use in buildings and for protected outdoor installations. It features a robust construction with an integrated distribution terminal and is suitable for use in indoor environments as well as under outdoor influences, provided the environment is not continuously exposed to direct precipitation or strong mechanical stress. The housing is finished in a grey colour (RAL 7035) and offers a compact design with dimensions of 93 mm height, 93 mm width, and 62 mm depth. Mounting is achieved via integrated external flanges, ensuring secure attachment to walls or ceilings. The lid is secured using a quick-release fastener, requiring a quarter-turn to open and close, and visually indicating the locking position. Additionally, a lid retention strap is included in the delivery scope, ensuring secure fixation of the lid.

Applications

The cable distribution box is intended for surface installations in residential and commercial buildings, particularly in areas subject to moderate mechanical stress or temporary moisture. It is suitable for use in protected outdoor areas, for example, on building walls under roof overhangs or in covered terrace areas, where it is shielded from direct rain and strong mechanical impacts. The protection rating IP66 ensures dust-tight and waterproof sealing, making it suitable for humid environments such as kitchens, bathrooms, or industrial facilities with increased humidity. The impact resistance IK07 protects against moderate mechanical impacts.

Functions and Equipment in Detail

The box features a 5-pole distribution terminal with innovative terminal technology, designed for conductor cross-sections from 0.75 mm² to 4 mm². The maximum number of conductors that can be connected at a single terminal point depends on the cross-section: up to four for 0.75 mm² to 1 mm², three for 1.5 mm², two for 2.5 mm², and one for 4 mm². The terminals are designed for single-strand, multi-strand, and fine-strand, round copper conductors. Connection is made via screw connection, with a required tightening torque of 0.5 Nm. No wire end ferrule is required for flexible conductors. The stripping length is 10 mm. Cable entry is achieved through elastic sealing membranes integrated into the housing walls and base. These membranes are removable, allowing cable glands to be installed later, for example, for a more permanent and tighter cable entry.

Technology Explained Simply

The integrated distribution terminal enables a secure and reliable electrical connection of multiple conductors. The elastic sealing membranes ensure waterproof sealing of cable entries and prevent moisture or dust ingress. The membranes can be removed to install cable glands, allowing flexible adaptation to different cable diameters. The protection rating IP66 means the housing is dust-tight and protected against water jets from all directions, making it suitable for use in damp or slightly wet environments. The impact resistance IK07 protects against moderate mechanical impacts, such as those occurring during normal handling or minor bumps.

Compatibility and Accessories

To extend functionality, suitable cable glands can be used. Available in the range are, for example, the Hensel ESM 20 push-in gland IP55 M20 grey and the Hensel STM 20 stepped gland IP55 M20 for pre-punched M20. These enable a permanent, tighter cable entry and are designed for M20 pre-punching. The sealing range of the glands is between 5 mm and 16 mm, allowing flexible adaptation to various cable diameters. Using these accessories requires removing the elastic sealing membranes from the housing.

Mounting and Installation

Mounting is done using the included external flanges, which are inserted into the housing and fastened to the wall or ceiling. The lid is secured using a quick-release fastener, enabling simple and secure operation. The lid retention strap ensures the lid does not get lost even when opened. Installation must comply with applicable standards, particularly DIN VDE 0100, part 737, and is designed for ambient temperatures from -25 °C to +40 °C. Relative humidity must not exceed 50 % at 40 °C; at 25 °C, relative humidity up to 100 % is permissible.

Operational Advantages

The cable distribution box DK 0202 G offers a reliable and durable electrical connection with high mechanical and weather resistance. The integrated distribution terminal enables quick and secure connection of multiple conductors. The elastic sealing membranes ensure waterproof sealing, which can be replaced by cable glands if needed. The quick-release lid fastening facilitates maintenance and inspection. The housing is made of halogen- and silicone-free polypropylene, improving fire behaviour properties and enhancing environmental compatibility. The material temperature resistance of -25 °C to +80 °C ensures stable performance over a wide temperature range. Certification according to DIN EN 60670-1/-22 and IEC 60670-1/-22, as well as VDE 40049684, ensures compliance with standards and product quality.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/147783
qrcode für Gustav Hensel DK 0202 G Junction Box 5-pole waterproof