The Gustav Hensel small distributor type KV 4548 is an appliance housing made of high-quality thermoplastic, specifically polystyrene, designed for surface mounting in buildings or protected outdoor applications. The housing offers 48 mounting units (TE), distributed across four rows with 12 TE each, and is designed for mounting devices with snap-in fastening on DIN support rails. The support rails are spaced 125 mm apart, ensuring compatibility with standard devices. The protection rating IP 54 safeguards against dust and splashing water, making the distributor suitable for use in damp or slightly exposed environments. The transparent door allows visual inspection of installed devices without opening the housing.
Applications
This small distributor is suitable for installations in indoor spaces as well as protected outdoor areas, for example on buildings or in technical rooms, where some moisture exposure or splashing water may occur. The maximum ambient temperature is 35 °C over 24 hours; the operating temperature ranges between -5 °C and +40 °C. The relative humidity must not exceed 50 % at 40 °C, while up to 100 % is permitted at 25 °C. During installation, climatic influences such as solar radiation and temperature fluctuations must be considered to avoid condensation formation.
Functions and Equipment in Detail
The housing features integrated elastic sealing membranes for cable entry, available in various sizes (7–29 mm), mounted on the upper and lower walls of the housing. The cable entry cover and sealing strips ensure proper guidance and shielding of the cables. An integrated accessory compartment provides space for small tools or spare parts. The labelling strips allow clear identification of switching devices.
Technical Explanation
The electrical characteristics of the distributor include a rated voltage of 400 V and a rated insulation voltage of 690 V AC. The terminals are designed using FIXCONNECT® technology, with N and PE terminals configured for plug-in connections. The rated current of the terminal is 75 A. The connection cross-sections vary depending on terminal type: plug-in terminals for 1.5 mm² to 4 mm² (single-strand and fine-strand), screw terminals for 1.5 mm² to 25 mm² (fine-strand) and 4 mm² to 6 mm² (single-strand). The maximum number of conductors per terminal point is 4 for smaller cross-sections. The power loss output is 43 W at a temperature difference of 30 K.
Compatibility and Accessories
The distributor is suitable for devices up to a nominal current of 63 A, mounted on DIN support rails (35 mm hat profile). Compatible accessories include the Hensel KV ES1 mounting lock, intended for securing the housing. The terminals are designed for various conductor types (single-strand, fine-strand, multi-strand) and materials (copper). Protection class II ensures a double-insulated design without additional earthing.
Mounting and Installation
Mounting is performed on a DIN support rail, included in the delivery. The support rail spacing of 125 mm corresponds to the standard for electrical distributors. The integrated sealing membranes allow flexible cable entry, positioned on the upper and lower walls of the housing. The transparent door is secured via a locking mechanism. The sealing strips and labelling strips facilitate installation and maintenance.
Operational Advantages
The distributor offers high mechanical and electrical reliability due to the use of polystyrene with a temperature resistance from -25 °C to +80 °C. The materials are halogen-free and silicone-free, enhancing safety and environmental compatibility. Integrated features such as cable entry, accessory compartment, and labelling options reduce installation time and improve maintainability. The IP 54 protection rating ensures reliable operation in damp environments.
Material Properties
The housing is made of polystyrene, which has passed the glow wire test according to IEC 60695-2-11 at 750 °C and features UL 94 V-2 classification. The materials are halogen-free and silicone-free, improving fire behaviour and environmental compatibility. The temperature resistance ranges from -25 °C to +80 °C.
Compliance with Standards
The small distributor complies with standards DIN EN 60670-1 and DIN EN 60670-24. Tender specifications refer to DIN 43871, IEC 61439-3, and DIN 43880, allowing devices up to 63 A with snap-in mounting.
Dimensions
The housing dimensions are 708 mm (height), 295 mm (width), and 129 mm (depth). The net weight is 4.068 kg.
Approvals
The approvals include compliance with standards DIN EN 60670-1 and DIN EN 60670-24. The E-number for Switzerland is 822 341 109.
Scope of Delivery
The product is delivered with closure plugs, support rail(s), sealing strips, labelling strips, and cable entry cover.